Siruba F007KD · 5.6mm · Direct drive
A smooth, supported path to a clean hem.
The Siruba F007KD industrial flatbed coverseamer is built for garment hems and coverstitch finishing, with a broad working surface to support the fabric as you sew.
Finish T-shirts, sleeves, underwear and knitwear with a 5.6mm, three-needle coverseam. The direct-drive servo motor and adjustable speed let you choose a comfortable pace for each operation.
For your garment workroom
Support the fabric. Guide the finish.
Everyday garment hems
A dedicated coverseamer for finishing T-shirt bottoms, sleeves and suitable knit garments. Use it alongside your other sewing machines for a consistent finishing workflow.
A flat working surface
The machine bed sits flush with the table, supporting panels and longer hems as you guide them past the needle. It is a practical choice when most of your work can be laid flat.
Adjustable working speed
The servo motor is mounted directly on the sewing head. Set the speed to suit the fabric, operation and operator, rather than working at maximum speed throughout.
See the stitch
Coverstitch finishing for knit fabrics.
Coverseams secure the folded edge of a hem while forming a covering stitch underneath. The five-thread configuration also provides top covering for a double-sided coverstitch finish.
Test your thread, needle and tension settings on an offcut before sewing the garment. The right setup helps the seam work with the fabric without unnecessary puckering.
Choose the bed that suits your work
Flatbed support or cylinder-arm access?
Choose this flatbed model for supported panels and hems laid across the table. If access around tubular sections is your priority, compare the Siruba cylinder-arm coverseamer.
The wider F007 family includes specialist attachments and automated versions. Automatic thread trimming, top feeding and dedicated binding devices are not included unless separately specified.
Specifications at a glance
| Model | Siruba F007KD |
|---|---|
| Machine type | Industrial flatbed coverseamer / interlock stitch machine |
| Configuration | 3 needles, 5 threads; 5.6mm needle gauge |
| Maximum stitch length | 4.2mm |
| Presser-foot lift | 5mm |
| Maximum sewing speed | Up to 6,000 stitches per minute; working speed depends on material and operation |
| Motor | Direct-drive servo with adjustable speed |
| Needle system | UY128 / DVx43 |
| Warranty | 1-year return-to-base warranty |
Included with your machine
Supplied built up with table, motor, thread stand and accessories, on a wheeled stand for easier positioning.
- Oil
- Screwdriver
- Needles
Table and stand appearance may vary from product imagery.
Official Siruba documentation
F007K / F007KD instruction book
Manufacturer’s general seaming and bottom-hemming information
These references cover multiple F007 configurations and optional equipment. Use the specifications above for this listing.
Order online, with nationwide NZ freight available.
Use Add to Cart above to order your Siruba F007KD. Freight can be arranged throughout New Zealand.
Pair with Coats Astra sewing thread, or browse more industrial coverseam machines.