Sewing room · embroidery studio · workshop
Shop sewing machine oils, refillable applicators and cleaning tools in New Zealand. Match the lubricant to your machine first, then choose an oiler that reaches its approved maintenance points.
Does your machine need user oiling? Follow the exact model’s manual. Some machines are factory-lubricated and must not be user-oiled. If yours gives no oiling procedure, ask us with the model number before adding lubricant.
01 · Match the lubricant first
Brand names and bottle sizes do not establish compatibility. Check the required oil designation, grade and application points before buying.
A smaller maintenance supply
A compact bottle for occasional care where your machine’s instructions permit this type of sewing machine oil.
Pair with a brush for lint removal and, if needed, a separate precision applicator.
View SINGER 100ml
For regular workshop use
A larger supply for maintaining multiple compatible machines or refilling clean, suitable oilers.
Label each applicator with its contents and keep different oils separate.
View SINGER 1LFind the oil named in your manual. Products with different specifications are separate choices, even when they are sold for similar machines.
| Oil | What to check |
|---|---|
| JUKI Oil 7 · 450ml | For machines specifying JUKI Oil 7. JUKI identifies it as equivalent to ISO VG7 for the DDL-7000A series. Check your full model and suffix. |
| JUKI Defrix No. 2 | The listing specifies ISO VG32. Select where Defrix No. 2 is called for; do not assume every walking-foot machine uses it. |
| Embroidery oil · 1L | The listing specifies mineral-based ISO 32 oil. Confirm both the lubricant and oiling points for your embroidery model. |
| General-purpose oil · 1L & 5L | Choose a size after confirming the current oil specification against your equipment manual. “General-purpose” does not mean universal compatibility. |
| HD46 synthetic oil · 500ml | For specified carpet-overlocker and bag-closer applications. Confirm the exact oil requirement rather than choosing by machine category alone. |
| Odif LB5 · 50ml | A precision lubricant spray with an extension tube. Use only where your machine permits this product and delivery method; follow the can’s handling directions. |
Reference: JUKI DDL-7000A oil specification. Matching viscosity alone does not establish that two oils are interchangeable. The full range stays visible; check current availability on each listing.
02 · Choose how to apply it
A simple bench applicator
A compact applicator with a long narrow spout and steel cap. Useful for placing oil at approved points without working directly from a larger bottle.
View the PO10 oiler
Adjustable reach
A squeeze applicator with an adjustable brass tube and small tip. Choose it when the position of a permitted oiling point calls for extra reach.
View retractable oiler
Fine-point precision
A refillable oiling pen with a fine applicator and protective cap for difficult-to-reach points. Check the current product details for capacity and supplied contents.
Use the exact article number when comparing Madeira pens.
View Madeira oiling penOil and applicator are separate choices. Use only the lubricant your machine specifies, including when refilling. Check the supplied contents before ordering; ask us if you need confirmation that an applicator includes oil. Avoid mixing unidentified oils.
03 · Complete the maintenance setup
A simple everyday add-on
Keep a dedicated brush beside the machine for loose lint in the areas your manual lets you clean.
Add a lint brush
More brush shapes
One single-ended and one double-ended brush for different cleaning areas. Use the brush shape that fits without forcing it into the mechanism.
View the Kearing setTwo screwdrivers and a nylon brush for basic permitted maintenance tasks. Choose tools that fit your machine’s screws.
View the Prym set →The listing includes an 18 × 18cm anti-static cloth, plastic brush and 4.5ml oil can. Check the oil’s suitability before use.
View the Bohin kit →These are shopping suggestions, with products sold separately. Start with your machine’s maintenance instructions.
Where SINGER oil is permitted, choose a small bottle, a brush and an applicator if the existing nozzle cannot reach the approved point.
Choose the specified oil in a practical volume, then a clean labelled applicator and tools for routine lint removal.
If your manual says no user oiling, choose the appropriate cleaning tools and follow its service guidance.
No. Match the exact lubricant specification and model instructions. Oil 7, ISO 32 and specialist oils are not interchangeable simply because all appear in a sewing shop. Some components need grease instead, and some machines require no user-applied lubricant.
First choose an approved oil. Then choose a volume that fits your maintenance frequency, number of machines and the product’s storage guidance. A bigger bottle is useful only when it contains the right lubricant.
Use the amount and intervals in the manual. A drop point and an industrial reservoir have different instructions. Switch off and unplug as directed, remove lint, apply at the specified points, wipe accessible excess, reassemble and test on scrap.
No. LB5 is a lubricant. Remove lint using an approved cleaning method first. Do not spray generally into the machine or onto electrical parts; use it only where the machine permits it and follow the can’s safety directions.
Noise or stiffness can have several causes. Stop if the machine is not running normally, consult the manual and request an assessment if needed. Adding more oil is not a substitute for identifying the fault.
