JACK JK-T1310 · Programmable pattern sewing
Precise repeat stitching for smaller components.
Bring consistency to compact labels, badges, hook-and-loop pieces and reinforcement patterns with the JACK 1310. Its 130 × 100mm sewing field follows a programmed stitch path, helping you repeat the same operation once the pattern and job-specific fixture are set up.
NZ$14,999 including GST
Machine package · Application setup quoted separately.
Important: additional application costs
The advertised price is for the machine package. The following are additional and quoted separately:
- Job-specific clamps, fixtures and tooling
- Additional devices, including flip-flop and side-sliding attachments where applicable
- Pattern design, digitising and programming
- Operator training
- Delivery
Optional devices pictured below are not included in the advertised price. Send a sample, label or badge dimensions, and your required stitch layout for an application-specific quotation.
130 × 100mm, matched to the job.
The compact choice when your complete stitch layout fits within 130 × 100mm. Useful for garment labels, small patches and suitable strap or accessory components. Have your actual material and stitch pattern assessed before selecting the needle, thread and clamp.
Program it, then repeat it
Create and adjust stitch patterns through the control system, or import compatible sewing data by USB. The machine guides the clamped work along the programmed path.
Controlled material support
The electronic intermediate presser foot supports the material during stitching. Automatic thread trimming helps prepare for the next cycle.
This is a pattern sewing machine for programmed seams and component attachment, not a multi-needle embroidery machine. The stated sewing field is maximum X-Y stitch travel; usable space depends on the clamp, attachment and clearances.
Optional label-handling equipment · Additional cost
Flip-flop clamp for labels and badges.
F1 flipping presser-foot option
The flipping clamp positions and holds a label or badge for its programmed sewing cycle. It is an application-specific setup for labels, logos, patches and hook-and-loop pieces, not a universal clamp supplied with the base machine.
F1 configurations are available in the 1310 and 2210 families. The photograph shows the 2210F1 mechanism; the tooling and effective sewing area for your 1310 must be confirmed against your sample.
Attachment, job-specific clamp and programming cost extra.
Key specifications
- Model family
- JACK JK-T1310
- Maximum sewing field (X × Y)
- 130 × 100mm
- Machine type
- Computerised lockstitch pattern sewing machine
- Maximum sewing speed
- Up to 2,700 stitches per minute; actual speed depends on the pattern and material
- Needle system
- DP×17; size selected for the application
- Operation
- Electronic pattern control with touch panel and USB sewing-data transfer
Compare the JACK pattern-machine range
Choose around your complete stitch layout and tooling requirements. Flip-flop configurations are available for 1310 and 2210; side-sliding configurations are available for 2210 and 3020. All are quoted to suit the job.
Enquire to order your application setup.
Supplied with table, stand, motor and control system. Use Enquire to order above to confirm availability, lead time, your machine configuration, electrical supply and any compressed-air requirements. Clamps, devices, programming, training and delivery remain separately quoted items.