Water-sensitive projects
Choose a heat-removal method when the fabric should not be soaked, provided it can tolerate the required ironing.
Sulky Thermofilm · Heat-removable embroidery film
A clean finish without a water rinse.
A thin, transparent film for embroidery where washing out a stabiliser is unsuitable. Tear away the excess, then remove remaining film with a dry iron on compatible, heat-tolerant materials.
This 25cm-wide roll contains 10m of clear film.
25cm × 10mRoll width × length
Heat-removable embroidery filmApplication
30 micronsFilm thickness
When to choose Thermofilm
Visible reverse sides
Useful where leftover backing would show on the reverse of a design and a softer finish is important.
Light, clear support
The transparent 30-micron film supports suitable embroidery without becoming a permanent fabric backing.
Product details
| Supplied | One 25cm × 10m roll |
|---|---|
| Type | Heat-removable embroidery film |
| Thickness | 30 microns |
| Material | 100% polyethylene |
| Removal | Tear excess; dry-iron remaining film |
| Product code | 3000009 |
Check the roll width against the area you need to cover, including enough material for secure hooping where required.
How to use it
- Place the textured side of Thermofilm against the underside of the fabric, then hoop both layers.
- Stitch the design and carefully tear away excess film towards the embroidery.
- Following the pack directions, use a dry iron in circular movements to turn remaining film into small particles. Brush or shake them away.
Check fabric and thread heat tolerance first. Use an iron, not a heat press, and no steam. Thermofilm is not recommended for high-pile fabrics such as towelling; choose a suitable wash-away topping for those.
Good to know
Is Thermofilm the same as Thermofix?
No. Thermofilm is removed after embroidery. Thermofix is a fusible adhesive web used to bond fabric layers or patches permanently.
How should I store the roll?
Keep it in a closed plastic bag in a dry place, away from heat and direct sunlight.
Find the right support for your project
Other roll sizes: Sulky Thermofilm 50cm × 10m.
Related options: Sulky Solvy 25cm × 10m · Sulky Thermofix 25cm × 5m.
Explore the Sulky stabiliser range for tear-away, cut-away, wash-away and finishing products.