PRYM · FASTENER REINFORCEMENTS · 966020
Reinforce fabric where snaps and eyelets go
Iron a Power Dot onto the reverse of a fine or stretchy fabric before fitting a press stud or eyelet. It helps support the point where the fastener pulls on the fabric during use.
What you receive
100 white iron-on dots, 70 of 20 mm and 30 of 30 mm.
Apply to the wrong side before setting the fastener
Place the dot under the point where the fastener will sit and follow the pack’s pressing instructions. Test first on a scrap of your fabric to check it can take the required heat.
| Dot diameters | 20 mm and 30 mm |
|---|---|
| Colour | White |
| Application | Iron-on to the reverse of the fabric |
| Use with | Press studs, plastic snaps and eyelets |