Walking-foot textile sewing
For a machine specified to take DPx35, use a suitable size for textile layers such as upholstery fabrics. Test the completed seam before production.
Apparel Equipment Services Supplies · Walking-foot machine needles
The DPx35 system, in two practical size choices.
These DPx35 / 134-35 replacement needles are for compatible walking-foot machines, including models whose manuals specify this system. Choose 120/19 or 140/22 for the thread and material being sewn. The standard option is a cloth-point needle, so do not confuse it with a separately specified leather-cutting version.
Pack of 10 needles in your selected size.
DPx35 / 134-35Needle system
2 sizes120/19 or 140/22
10 needlesSelected size
Choose it for your project
Bag and cover construction
Match the thread and needle to the material and thickness at joins. A successful sample should include any folded edges or extra layers.
Like-for-like replacement
Check the full system and point on your existing packet against the manual. Do not use the machine’s brand as the only buying guide.
Product details
| Supplied | 10 needles of the selected size |
|---|---|
| Needle system | DPx35 / 134-35 / 2134-35 |
| Point | Standard R cloth point |
| Size choices | 120/19, 140/22 |
Choose the required option in the selector above. Each selection is supplied separately; this is not a set of every size shown.
Before you start
- Check the machine’s complete needle system and size range. Choose the point and size for your fabric and thread.
- Switch off and isolate the machine as instructed. Install the needle fully, in the orientation specified by the manual.
- Sew a sample with the intended layers and thread. Check stitch formation and fabric marking before continuing.
DPx35 / 134-35 is different from DPx17 / 135x17 and DPx5 / 134. These standard needles do not become leather-cutting needles by choosing a larger size.
Good to know
Do these fit all Pfaff or Adler walking-foot machines?
No. Only use them where the exact model specifies this system and accepts the chosen size.
Does R mean a leather-cutting point?
No. R is a normal round cloth point. Leather-cutting points carry different designations and should be selected for the intended material and seam.
Compare your options
Dotec DPx17 Walking Foot & Bartack Needles – 10 Pack · Groz-Beckert 135x17 GEBEDUR Walking Foot Needles – 10 Pack