KnitPro Rainbow Knit Blockers - Pack of 20 with Storage Case

$48.00 $52.90

Faster blocking, even tension and a joyful hit of colour

Set wide edges neatly with fewer placements

KnitPro Rainbow Knit Blockers place four or eight evenly spaced stainless-steel points at once, helping you shape knitting and crochet efficiently while it dries. Ten bright colours make the two blocker sizes easy to see, and the fitted case keeps all 20 sharp tools organised.

  • 20 blockers in two practical widths for long edges, curves and corners.
  • 128 embedded pin points distribute tension across a wider section of fabric.
  • Ten colourful finishes turn a practical blocking job into a brighter one.
  • Fitted storage case included for organised, secure storage between projects.
KnitPro Rainbow Knit Blockers pack of 20 in the fitted blue storage case 20 Blockers, 128 Points
20 BlockersTwo practical widths
128 PointsRust-resistant stainless steel
10 ColoursEasy-to-see rainbow set
10878KnitPro article number
The complete Rainbow set

Two widths give you speed along edges and control around details

The larger combs cover straight sections quickly. The smaller combs fit short edges, corners and changes in direction. Together, the 20 blockers provide 128 parallel pin points in one fitted blue case.

12Large 8-pin blockers

Approximately 7.2cm wide, with eight embedded points in each blocker. The twelve large combs provide 96 points for longer edges and wide projects.

8Small 4-pin blockers

Approximately 3.6cm wide, with four embedded points in each blocker. The eight smaller combs provide 32 points for corners, curves and shaping.

Ten colours

The rainbow assortment makes the set bright, visible and easy to organise on your blocking surface.

Fitted blue case

The included box keeps both widths together and the sharp points covered between uses.

Durable handles

Broad plastic bodies give you a controlled surface for careful insertion and removal.

Tools sold separately

Blocking mats, wires, string, T-pins, tape measure, spray bottle and project are not included.

Sharp blocking tool: keep the case closed when the blockers are not in use, and store it securely away from children and pets. These tools are not toys.
See the real set

Official KnitPro photography shows every blocker and detail

Why blockers are so efficient

Even spacing is built into every comb

Each press places four or eight parallel pin points at once. That helps spread tension across a wider section, keeps straight edges easier to align and reduces the scalloped look that widely spaced individual pins can leave behind.

Sweaters

Align body pieces, sleeves, shoulders and hems to the pattern measurements before seaming.

Shawls

Hold long edges evenly, then add individual T-pins where decorative points need precise control.

Scarves

Straighten long sides and help the fabric settle into a consistent finished width.

Blankets

Control wide edges, crochet borders and joined sections on suitable foam blocking mats.

Motifs

Use the smaller blockers to square motifs and prepare matching pieces for assembly.

More control for long sections

Use the anchor holes as part of your blocking method

With string or smooth cord

  • Secure a suitable line through the anchor holes
  • Use it as a visual reference along a project edge
  • Adjust tension gradually instead of pulling one area aggressively
  • Choose a clean, non-shedding line that will not mark the yarn

Alongside blocking wires

  • Thread a suitable blocking wire through the project edge first
  • Place blockers beside the wire to secure the fabric to the mat
  • Create smooth straight lines or gentle curves
  • Blocking wires are separate accessories and are not included
Block to the pattern measurements: the aim is to shape and settle the fabric, not to stretch every project as far as it will go. Check the yarn care instructions and avoid distorting the stitches.
A careful five-step routine

Prepare, measure, position, dry and store

Check the fibre

Follow the yarn label or pattern and choose a wet, spray or other suitable blocking method.

Prepare the work

Remove excess moisture gently without wringing, then lay the project on clean foam blocking mats.

Measure and align

Ease the fabric to the required dimensions and arrange the edges before inserting sharp tools.

Press blockers in

Choose the large or small width, avoid splitting yarn strands and distribute tension evenly.

Dry and pack away

Leave the piece undisturbed until fully dry, then remove, dry, inspect and case all 20 blockers.

Choose the right tool for each edge

Knit blockers, T-pins and wires work beautifully together

Tool Particularly good for Best reason to choose it
Rainbow Knit Blockers Straight edges, garment pieces, scarves, blankets and quick general blocking Place four or eight evenly spaced points at once
KnitPro T-Pins Lace points, curves, corners, irregular outlines and isolated adjustments Fine control over one precise anchor point
Blocking wires Long straight lines, smooth curves and lace borders Support a continuous edge while blockers or T-pins hold the wire in place
Rainbow or Original?

The same useful blocker mix, with a different look

Set Article Colour Contents Storage case
Rainbow Knit Blockers 10878 Ten-colour assortment 12 large 8-pin and 8 small 4-pin blockers Blue fitted case
Original Knit Blockers 10877 White handles 12 large 8-pin and 8 small 4-pin blockers Purple fitted case
Stocking note: Rainbow 10878 and Original 10877 have separate article numbers and barcodes. Choose this listing for the colourful Rainbow set shown in the photographs.
Watch the official demonstration

See how KnitPro blockers support a clean blocking setup

Official KnitPro video. The demonstration may show other blocking accessories that are sold separately.
Care and safe storage

Protect the points, handles and your next project

Dry after blocking

Wipe away moisture and let each blocker dry fully before returning it to the case.

Inspect the pins

Stop using a blocker if a point is bent, rough, loose, damaged or showing corrosion.

Use a pin-safe mat

Do not press the points into furniture, floors, upholstery or an unprotected work surface.

Account for all 20

Check the set after every session and keep the fitted case closed in secure storage.

Product details

KnitPro Rainbow Knit Blocker specifications

Brand KnitPro
Product Rainbow Knit Blockers
Article number 10878
Barcode 8907628003586
Total quantity 20 blockers
Large blockers 12 pieces, each with 8 embedded pins
Small blockers 8 pieces, each with 4 embedded pins
Total pin points 128
Colour assortment Ten colours across the set
Approximate large size 7.2 x 4.5 x 0.5cm
Approximate small size 3.6 x 4.5 x 0.5cm
Handle material Durable plastic
Pin material Rust-resistant stainless steel
Anchor holes Yes, for attaching string along a longer edge to help maintain even tension
Storage Fitted blue case included
Primary use Blocking knitted and crocheted projects on suitable foam mats
Not included Mats, wires, string, T-pins, tape measure, spray bottle or project
Safety Sharp points. Store securely away from children and pets.
Questions before blocking?

Rainbow Knit Blocker FAQs

How many blockers are in the set?

The case contains 20 blockers: 12 large 8-pin blockers and 8 small 4-pin blockers.

How many metal pin points are there altogether?

There are 128 embedded points: 96 across the twelve large blockers and 32 across the eight small blockers.

How many colours are included?

The Rainbow set uses ten colours across its 20 blockers.

Is a storage case included?

Yes. The set is supplied in the fitted blue case shown in the official product photographs.

What is the KnitPro article number?

The Rainbow set is article 10878. The Original white set is a separate product, article 10877.

What are the pins made from?

The embedded pins are rust-resistant stainless steel. Dry them after use and stop using a blocker if a pin becomes damaged or corroded.

Why are two widths included?

The large 8-pin blockers move quickly along long, straight sections. The smaller 4-pin blockers give more control around corners, short edges and changes in direction.

What are the holes in the handles for?

The anchor holes can accept a suitable string or be incorporated into a blocking-wire method to help maintain a straight reference and even tension.

Are blocking mats included?

No. Use the blockers with a clean, stable foam blocking surface purchased separately.

Are blocking wires or T-pins included?

No. Both are separate accessories, although they can work alongside this set for detailed lace points, smooth curves and long continuous edges.

Can I use these for crochet?

Yes. They can square motifs, straighten borders and shape crocheted garments or accessories when the fibre is blocked according to its care instructions.

Are they suitable for lace points?

They are excellent for straighter lace edges. For individual decorative points or very irregular outlines, add separate T-pins for precise placement.

Can I use them for wet or spray blocking?

Yes, when the method suits the yarn. Prepare the project according to its care instructions, shape it on suitable mats and let it dry completely before removing the blockers.

Will blocking make a project permanently larger?

That depends on the fibre, stitch structure and care routine. Block to the required measurements and avoid using the process to force an unsuitable fit.

How should I store the blockers?

Dry and inspect every blocker, return all 20 to the fitted case and keep the closed case in a secure, dry place away from children and pets.

Make the finishing stage faster, neater and much more colourful

Use the large blockers for efficient edge coverage, bring in the smaller blockers for detail, and keep the complete Rainbow set ready for your next sweater, shawl, blanket or crochet project.

Review the Complete Set