Position each anchor exactly where the edge, point, curve or measurement needs support.
KnitPro Blocking T Pins – Stainless Steel Knitting & Crochet Blocking Pins
$7.49
$8.50
Shape, smooth and finish handmade pieces beautifully
Precise blocking, one pin at a time
KnitPro Blocking T-Pins give knitters and crocheters secure, adjustable control while a damp or misted project dries to shape. Their sturdy stainless-steel construction, sharp points and easy-grip T heads make them especially useful for curves, lace points and irregular edges.
- Pack of 50 gives you plenty of individual anchor points.
- Rust-resistant stainless steel helps protect carefully made pieces.
- Approximately 4cm long for secure placement in suitable foam blocking mats.
- T-shaped heads are easy to see, position and remove.
50 Rust-Resistant Pins
50 PinsOne complete pack
T-ShapedEasy-grip heads
Approx. 4cm1.5in pin length
10873KnitPro article number
One box containing 50 individual blocking T-pins
This is a generous single pack of 50 reusable pins. Place as many as your project needs to spread tension evenly, refine the outline and prevent the scalloped edge that can occur when pins are spaced too far apart.
The visible crossbar provides a practical surface for handling and removing each sharp pin.
Suitable for damp blocking when used correctly, dried after use and stored carefully.
Blocking mats, wires, knit blockers, measuring tape, spray bottle and project are not included.
Sharp tool: T-pins are not a toy. Work on a stable surface, keep track of every pin and store the full pack securely away from children and pets after use.
Designed for controlled placement on blocking mats
The finishing step that lets stitches settle into place
Blocking uses moisture, measurements and gentle shaping to help a finished piece relax into its intended form. The correct method depends on the fibre and care instructions, but precise pin placement gives you control over the outline while the work dries.
Lace
Open eyelets and define decorative points without losing the intended shape.
Garments
Bring panels and finished pieces to the measurements stated by the pattern.
Shawls
Shape curved, triangular, asymmetrical and scalloped outlines with individual anchors.
Crochet
Square motifs, smooth edges and prepare matching pieces before joining.
Accessories
Refine hats, cowls, scarves and other pieces after checking the yarn care guidance.
Measure, shape, pin, dry and store
Check the fibre
Follow the yarn label or pattern instructions and choose wet, spray or another appropriate blocking method.
Prepare the surface
Lay suitable foam blocking mats on a clean, flat and protected work area.
Shape evenly
Arrange the project to its target measurements without stretching beyond the fabric's natural limit.
Add the pins
Insert pins at a slight outward angle and use enough anchors to distribute tension evenly.
Dry completely
Leave the work undisturbed, then remove, count, dry and return all pins to secure storage.
Protect the fabric: avoid forcing a pin through yarn strands. Place it through open space or immediately beside the edge, and never stretch the project more aggressively than the fibre and pattern allow.
T-pins, knit blockers and blocking wires each have a role
T-pins offer the greatest freedom for detailed placement. They can also work alongside blockers or wires when a project combines straight sections, curves and decorative points.
| Blocking tool | Particularly useful for | Why choose it |
|---|---|---|
| Individual T-pins | Curves, corners, lace points, irregular edges and isolated adjustments | Fine control over every anchor point and tension change |
| Knit blockers | Longer straight edges and faster general blocking | Several closely spaced pins move together in one handle |
| Blocking wires plus T-pins | Long straight lines, smooth curves and lace borders | The wire supports a continuous edge while T-pins hold the wire in position |
Flexible enough for delicate detail and firm shaping
Pin the edge directly
Place pins at regular intervals around the project, adding more wherever the edge begins to pull into scallops.
Define lace points
Use an individual pin at each decorative point so the repeat opens evenly and the outline remains balanced.
Anchor blocking wires
Thread suitable wires through the edge, then position T-pins outside the wire to create a smooth line or curve.
Protect the pins, your projects and the people around them
Wipe away moisture and allow pins to dry fully before returning them to the box.
Do not use a pin that is bent, rough, damaged or showing signs of corrosion.
Do not insert T-pins into tables, floors, upholstery or other unprotected household surfaces.
Count pins after every session and keep the closed box out of reach of children and pets.
KnitPro Blocking T-Pin specifications
| Brand | KnitPro |
|---|---|
| Product | Blocking T-pins |
| Article number | 10873 |
| Quantity | 50 individual T-pins |
| Material | Rust-resistant stainless steel |
| Shape | Long pointed shaft with a wide T-shaped head |
| Approximate length | 4cm / 1.5in per pin |
| Primary use | Blocking knitted and crocheted projects on suitable foam mats |
| Suitable projects | Lace, shawls, garments, blankets, motifs and accessories |
| Compatible tools | Foam blocking mats and blocking wires |
| Reusable | Yes, when cleaned, dried, inspected and stored correctly |
| Not included | Blocking mats, wires, knit blockers, tape measure, project or storage case beyond the retail box |
| Safety | Sharp points. Keep securely stored away from children and pets. |
KnitPro Blocking T-Pin FAQs
How many T-pins are in the pack?
One retail box contains 50 individual KnitPro blocking T-pins.
What is the KnitPro article number?
The official KnitPro article number is 10873.
What are the pins made from?
They are made from rust-resistant stainless steel for use during knitting and crochet blocking.
Are they completely rust-proof?
They are rust resistant, not guaranteed rust-proof. Dry them thoroughly after use, store them in a dry place and replace any pin that develops corrosion or surface damage.
How long is each pin?
Each T-pin is approximately 4cm, or 1.5 inches, long.
Why use a T-shaped head?
The wide head is visible against a project and provides a practical grip when positioning or removing the pin.
What can I block with them?
They are suitable for lace, shawls, garments, crochet motifs, blankets, scarves and many other knitted or crocheted pieces when the fibre is blocked according to its care instructions.
Are they especially useful for lace?
Yes. Individual placement makes it easy to define lace points, open decorative repeats and control irregular or curved borders.
Do I need blocking mats?
You need a clean, stable surface specifically suited to receiving sharp pins. Foam blocking mats are the usual choice and are sold separately.
Can I use the pins with blocking wires?
Yes. T-pins can anchor blocking wires in position, helping create long smooth lines or controlled curves.
Can I use them for wet blocking?
Yes, provided wet blocking suits the fibre. Remove the pins after the piece is completely dry, then dry the pins before storage.
Can I use them for spray blocking?
Yes. Shape and pin the work first, mist it according to the fibre's needs and leave it undisturbed until fully dry.
How far apart should the pins be?
Spacing varies by project. Use enough pins to keep tension even and add more if the edge pulls into visible scallops between anchor points.
Should the pins go through the yarn?
Avoid splitting or piercing yarn strands. Position pins through an open space in the fabric or immediately beside the edge wherever practical.
Are the pins reusable?
Yes. Wipe and dry them after use, inspect the shafts and points, then return them to secure dry storage.
Are these safe around children or pets?
No sharp pin should be left accessible. Keep children and pets away from the blocking area and store every pin securely after use.
Are blocking mats, wires or knit blockers included?
No. This listing contains the box of 50 T-pins only. All other blocking equipment is sold separately.
Give every edge, curve and lace point the support it needs
With 50 reusable T-pins ready to position individually, you can shape projects carefully, distribute tension evenly and let your finished work dry into a clean, considered form.
Review the Blocking Steps