Juki Pearl Attaching Presser Foot 40080956

Will it fit my Juki?

Match the complete name on your machine. Juki documents part 40080956 for these models:

DX series

• DX-2000QVP
• HZL-DX7
• HZL-DX5

F / Exceed series

• HZL-F600
• HZL-F400
• HZL-F300

G series

• HZL-G320
• HZL-G220
• HZL-G120
• HZL-G210
• HZL-G110

NX7

• HZL-NX7

UX series

• HZL-UX8S
• HZL-UX8
• DX-4000QVP
• DX-3000QVP

Model missing? This list covers the manufacturer references checked, rather than every older or regional model. Ask us to check your complete model before ordering.

What it does

• Guides strands of pearls or beads up to 4 mm in diameter through the dome-shaped groove underneath the foot.
• Use a zigzag stitch to secure the strand to your fabric.
• Also suitable for attaching thick cording, braiding and piping cord, including around curves.
• The clear foot helps you see the trim and stitching area.

One genuine Juki snap-on presser foot is supplied. Pearls, beads, fabric, foot holder and machine are not included.

Fitting and use

• Switch off your machine before changing the foot and follow the fitting instructions in your machine manual.
• Fit the foot securely to the compatible presser-foot holder.
• Guide the strand beneath the central groove and select a zigzag stitch that clears the beads.
• Turn the handwheel slowly to check that the needle clears the foot and trim before sewing.
• Test on a scrap of the same fabric and trim before starting your project.