Direct Sewing · Juki domestic accessories
Find feet, bobbins and replacement parts for your Juki sewing, quilting, overlocker or coverstitch machine.
Start with the full machine model, then match the part number and fitting notes. HZL, TL, MO and MCS accessories have different requirements.
Enter your full model for documented matches. Or leave the model blank to search every part by name or number.
Enter a model, part or accessory group to begin.
Computerised household sewing machines. G is part of the HZL family, but some G-series feet differ from DX and F feet. Match the whole model and part number.
Examples: HZL-DX7, HZL-F600, HZL-G120.
Browse HZL feet · Shop HZL-F Exceed parts & accessoriesCheck normal feet versus Juki Smart Feed attachments. Some quilting feet also need an adapter. NX7, UX8 and UX8S are not interchangeable model names.
Example: zigzag quilting foot 40080953 needs adapter 40207583 on HZL-NX7.
Browse feet and check modelsH, HT, L and older HZL models can use different feet, bobbins and holders. The HZL prefix alone does not identify the correct fitting.
Use the complete name printed on your machine.
Browse HZL partsChoose the TL foot, bobbin, plate or attachment listed for your machine. TL-2200QVP Mini is a portable straight-stitch machine. TL-2200QVP longarm accessories need a separate check.
Browse TL feet · Browse TL partsMatch the full domestic MO model. MO-1000 and MO-2000QVP use a different standard foot assembly from MO-2800 and MO-3000QVP. Industrial MO machines form a separate range.
Browse domestic MO partsFor coverstitch hems and chainstitch sewing. A chainstitch foot, standard coverstitch foot and hem guide do different jobs. Match the full MCS model and suffix.
Browse MCS accessoriesSome are shared, but not all. For example, Juki lists overcasting foot 40080960 for selected DX and F models, while the G range uses 40110163. Always check the individual part's model list.
Often they describe the sewing result. A 3mm hem foot makes a narrow hem, a 5mm binder makes approximately 5mm binding, and a 1/4 inch guide foot helps set a seam allowance. These measurements do not establish a universal Juki fitting category.
Choose the bobbin listed for your model. A98340300A0 is the five-bobbin blister-pack version of 001141000000, suitable for the documented DX, F, G, NX and UX machines. See the product listing for the full model list. Other HZL families can use different bobbins.
No. Include the word Mini when it appears on your machine. The finder does not shorten the Mini model to TL-2200QVP or treat its accessories as longarm parts.
Match the controller reference, connector, machine model and electrical specification. Regional Juki references can differ. A similar plug or a shared series name is not sufficient.
Some supplied stock codes, earlier part numbers or replacement suffixes need checking. Those items remain searchable by part name and number, with the uncertainty shown clearly. They are not presented as confirmed exact-model matches.
Send the full model, the original part reference and clear photos. The guide includes documented models from current and earlier Juki references, but does not claim to cover every historical or regional machine.
Open a group to see every listing. Each product page has its own part number, model information and fitting sources.
Have your full machine model, part number and a photo of the original part ready. Direct Sewing can help you choose.
Ask Direct SewingShop Juki domestic accessoriesLooking for an industrial machine part? Browse Juki industrial plain-sewer parts or contact us with the industrial model.
Reviewed September 2026 using Juki accessory charts, regional manufacturer information and original parts books. Source links and any unresolved reference checks are shown on each listing. This guide covers 69 active domestic accessory listings.
