JUKI AMS-210EN-HL2210 · Programmable cycle sewing
A wider sewing field for larger patterns.
Make room for wider components with the JUKI AMS-210EN-HL2210. The 220 × 100mm sewing field accommodates larger stitch layouts within the AMS-210EN range, making it a practical option for suitable bag components, straps, labels and reinforcement work with the right application-specific clamps.
NZ$28,000 including GST
Enquire to order · Application setup quoted separately.
Important: what the advertised price excludes
The advertised price is for the machine package. The following are additional costs, quoted separately:
- Job-specific clamps and fixtures to suit your work
- Additional devices, including flip-flop attachments
- Pattern programming
- Operator training
- Delivery
Please enquire with your sample, material details and stitch requirements so we can prepare a job-specific quotation. Photographed application setups or optional equipment are not included unless expressly itemised in your quotation.
Choose the right sewing field
220 × 100mm, matched to your application.
Choose the 2210 when your pattern needs more than 150mm of side-to-side travel. The 220 × 100mm sewing field gives this model the widest pattern capacity of these three machines, using a monolithic pneumatic feeding frame.
These dimensions describe the maximum sewing travel, not the overall size of the material you can load. The usable area for a particular job depends on the clamp, fixture and pattern clearances.
IP-420 control panel
Repeat the pattern. Control the stitch.
View and edit sewing data on the colour touchscreen, including the pattern, speed and needle-thread tension. Store patterns for repeat work and transfer sewing data through the USB connection.
Direct-drive operation and encoder-controlled X-Y movement support consistent programmed cycles. Electronic active tension allows needle-thread tension to be adjusted within a pattern. Machine programming capability is included; custom programming services are additional.
Material control
Support through changes in thickness.
The programmable intermediate presser helps control the material during stitching and can be set for changes in thickness. A semi-dry head uses grease lubrication in the needle-bar area and a small oil supply at the hook to help minimise oil staining.
For best results, select the needle, thread, clamp and sewing speed around your actual sample. A suitable sewing field alone does not confirm that a machine can sew every material or assembly.
Key specifications
- Model
- AMS-210EN-HL2210
- Sewing area (X × Y)
- 220 × 100mm
- Application class
- Medium-to-heavy materials
- Feeding frame
- Monolithic pneumatic feeding frame
- Maximum speed
- 2,800 stitches/minute at stitch lengths of 4mm or less; actual speed depends on the job
- Stitch length
- 0.1–12.7mm, in 0.05mm steps
- Needle system
- DP×17; factory specification #18
- Feeding-frame lift
- 30mm
- Hook
- Double-capacity shuttle hook
- Control panel
- IP-420 colour touchscreen
- Compressed air
- Required: 0.35–0.4MPa; consumption 1.8dm³/min (ANR)
- Electrical supply
- 200–240V configurations; the supplied phase and installation requirements are confirmed with your quotation
Compare the three sewing areas
Choose the field that accommodates your complete stitch pattern and the required tooling.
Plan the machine around the job.
Supplied as a machine package with table, stand, motor and control system. Use Enquire to order above to confirm availability, lead time, electrical and compressed-air requirements, and the additional clamps, devices, programming, training and delivery you require.