Compatible model: DX
Create larger papercraft projects while protecting delicate materials with the Brother ScanNCut DX Low Tack Adhesive Mat.
Measuring 12" × 24" (305 × 610 mm), this extended-length mat provides twice the working length of a standard 12" mat. Its lightly adhesive surface holds thin paper securely during cutting while allowing it to be removed more easily and with less risk of tearing or curling.
It’s ideal for lightweight materials such as printer paper, copy paper and vellum between approximately 0.1 mm and 0.3 mm thick.
Key features:
- Extra-long 12" × 24" cutting mat
- Low-tack adhesive surface for delicate materials
- Holds material securely while cutting
- Designed for easier removal of thin paper
- Suitable for paper between approximately 0.1 mm and 0.3 mm thick
- Can be used multiple times with appropriate care
- Suitable for both cutting and scanning compatible materials
- Genuine Brother ScanNCut accessory
Recommended materials:
- Printer and copy paper
- Vellum
- Lightweight decorative paper
- Thin scrapbook paper
- Other delicate paper between approximately 0.1 mm and 0.3 mm thick
Size:
12" × 24" / 305 × 610 mm
What’s included:
- One Brother ScanNCut DX Low Tack Adhesive Mat
- Protective storage sheet
Compatibility:
For Brother ScanNCut DX electronic cutting machines only. Not compatible with earlier ScanNCut CM-series machines.
Please note the similar-looking CAMATLOW24 is made for older CM-series machines and will not fit a ScanNCut DX. The correct 24" low-tack mat for DX models is CADXMATLOW24.
Care instructions:
- Replace the protective sheet after each use.
- Keep the adhesive surface free from dust, lint and scraps.
- Store the mat flat and away from direct sunlight, heat and humidity.
- Avoid touching the adhesive area more than necessary.
- Replace the mat when it no longer holds material securely.
Please note:
This is a consumable accessory. Adhesive strength will gradually decrease with use. Heavier cardstock, backed fabric and other substantial materials may require the CADXMATSTD24 Standard Tack Mat instead.