Save working space
The flat 16 × 12cm base leaves more room for fabric, tools, paper and the project itself.
Daylight UnoPro AN1450 | Compact LED table lamp
Clearer detail and truer colour—right where the work happens.
UnoPro Table brings bright, colour-accurate daylight to a desk, sewing table or craft station without taking over the surface. Its slim 16 × 12cm base, wide anti-glare shade and flexible arm make it easy to direct useful light across the project, then choose from four brightness levels with a touch.
- Maximum 1,150 lux at 30cm for bright close-up task illumination.
- CRI 95+ daylight LEDs help fabrics, threads, paints and print look true to life.
- Four touch-controlled brightness settings adapt to the task and surrounding light.
- Wide anti-glare shade with a pivoting joint spreads light and directs it where needed.
- Only 0.6kg with a compact base so it is easy to reposition around the home or studio.
1,150 lux + CRI 95+
1,150 luxmaximum at 30cm
4 levelstouch-controlled brightness
95+ CRIhigh colour accuracy
0.6kglight and easy to move
Set the base, shape the arm and turn the shade towards the detail
Bring light closer
Shape the approximately 37cm soft-touch flexible section to position the head above or beside the task.
Fine-tune the angle
Pivot the approximately 28cm wide shade so the work is illuminated while glare stays out of your direct view.
Made for a busy work surface
Bright enough for detail. Slim enough for everyday use.
UnoPro concentrates the features that matter in a clean, unobtrusive table lamp. The low-profile base stays stable without demanding a large clear area, while the long flexible section reaches across the workspace. At just 0.6kg, the complete lamp can be moved from a sewing table to a reading desk or craft bench with ease.
Choose strong detail light or a gentler everyday level
Maximum output
Up to 1,150 lux at the published 30cm measurement distance.Strong task light
Reduce the intensity while retaining bright close-range illumination.General working light
A balanced setting for many desk, sewing and craft tasks.Lowest setting
The gentlest of the four touch-controlled brightness options.Daylight publishes the maximum output of 1,150 lux measured 30cm from the lamp. Separate lux figures for the three lower settings are not specified.
See edges, stitches, markings and colour more confidently
Sewing + needlework
Direct the wide shade over stitching, unpicking, hand sewing, embroidery or thread selection.
Drawing + colour work
Assess lines, surfaces and colours under consistent 6,000K, CRI 95+ illumination.
Reading + puzzles
Bring adjustable light closer to fine print, charts, maps or pieces without lighting the whole room.
Beauty + precision tasks
Position the anti-glare head over nail, beauty, model-making and other close-detail work.
Place, route, bend, pivot and dim
Set the base
Place the complete 16 × 12cm base on a firm, level work surface.
Route the cable
Lead the 1.5m cable behind the workspace and away from cutting or moving parts.
Shape the arm
Hold the base and bend the soft-touch section gradually towards the task.
Pivot the shade
Angle the wide head across the work and outside your direct line of sight.
Select brightness
Use the touch dimmer to choose the clearest comfortable setting.
What the UnoPro Table specifications mean at the work surface
| Specification | Published value | Why it matters |
|---|---|---|
| Maximum illuminance | 1,150 lux at 30cm | Strong close-task brightness when the shade is positioned near the working area. |
| Brightness control | Four touch-controlled levels | Adjust intensity without changing the lamp position or adding an inline control. |
| Colour temperature | 6,000K daylight | A fixed crisp-white light colour suited to detailed work; dimming changes brightness, not colour. |
| Colour rendering | CRI 95+ | High colour fidelity when comparing fabrics, threads, paints, prints and treatment colours. |
| Shade format | Wide anti-glare head | Spreads light across the task while helping reduce direct glare. |
| Power | 8W / mains operation | Continuous connected use without a rechargeable-battery limit. |
Everything is focused on simple, adjustable task light
Wide anti-glare shade
Approximately 28cm head with integrated 6,000K, CRI 95+ LEDs.
Touch dimmer
Four brightness settings controlled directly from the lamp.
Pivoting head joint
Fine-tunes the direction of the shade around the task.
Flexible arm
Soft-touch section bends the light over a desk, machine or craft area.
Flat sturdy base
Compact 16 × 12cm footprint with a complete lamp weight of approximately 0.6kg.
Mains cable
Continuous powered operation without charging or battery-runtime limits.
Small positioning changes can make detail easier to see
Place the light to suit your working hand
Good task lighting is not only about brightness. The direction of the light can reveal texture and reduce hand shadows.
- Right-handed users can try placing the lamp to the left of the task; left-handed users can try the right.
- Bring the shade closer when stronger illumination is needed.
- Angle light across stitching or textured surfaces to make relief more visible.
- Turn the shade so the LEDs are outside your direct line of sight.
- Choose the lowest brightness level that still gives a clear, comfortable view.
Keep the setup tidy
UnoPro is lightweight and easy to move, with a flat base designed for a stable work surface.
- Keep the full base supported on a firm, level surface.
- Hold the base while adjusting the flexible arm.
- Route the cable away from blades, needles and moving equipment.
- Disconnect power before moving or cleaning the lamp.
- Wipe with a soft dry cloth; do not spray cleaner onto the lamp.
UnoPro Table, UnoPro Floor or DuoPro Table?
UnoPro Table AN1450
Choose this model for a slim, movable table lamp with one wide shade, four brightness settings and a small base.
Review Table SpecsUnoPro Floor AN1460
Choose the floor version when the lamp needs to stand beside a chair, machine or table instead of on the work surface.
View UnoPro FloorDuoPro Table AN1550
Choose DuoPro Table when two independently positionable shades are more useful than one wide UnoPro head.
View DuoPro TableThe quick reference
| Brand / model | Daylight UnoPro Table AN1450 |
|---|---|
| Product type | Single-head LED table task lamp |
| Light source | Integrated LED |
| Shade | Wide anti-glare shade with pivoting head joint |
| Brightness levels | Four |
| Control | Touch dimmer |
| Maximum illuminance at 30cm | 1,150 lux |
| Colour temperature | 6,000K daylight |
| Colour rendering | CRI 95+ |
| Energy consumption | 8W |
| Approximate shade length | 28cm |
| Approximate flexible-section length | 37cm |
| Base footprint | Approximately 16 × 12cm |
| Weight | Approximately 0.6kg |
| Cable length | Approximately 1.5m |
| Power source | Mains power; not rechargeable |
| Finish | White and grey |
| SKU | AN1450 |
Daylight UnoPro AN1450 table-lamp FAQs
How bright is the UnoPro Table Lamp?
Daylight publishes a maximum of 1,150 lux measured 30cm from the working surface. Actual illumination changes with distance and positioning.
What do the four brightness levels do?
The touch dimmer steps through four intensities so you can match the output to the task and ambient light. Daylight publishes a lux figure for the maximum setting only.
Can the colour temperature be changed?
No. UnoPro uses a fixed 6,000K daylight colour. The touch control adjusts brightness rather than light colour.
What does CRI 95+ mean?
CRI describes how faithfully a light source renders colours. A rating above 95 is useful when comparing fabrics, threads, paints, prints and beauty colours.
How much table space does it need?
The flat base measures approximately 16 × 12cm. Leave enough clearance for the flexible section, shade and power cable.
How tall is the lamp?
The published diagram shows an approximately 37cm flexible section and a 28cm shade. Overall working height and reach vary with the way the arm and head are positioned.
Is the lamp rechargeable?
No. UnoPro Table is mains-powered through its approximately 1.5m cable, providing continuous use without a battery-runtime limit.
Can I replace a bulb?
The light source is integrated LED, so there is no conventional bulb to change.
Does UnoPro include a magnifier?
No. This is an adjustable task lamp without a magnifying lens.
What is the difference between UnoPro Table and UnoPro Floor?
UnoPro Table AN1450 has a compact 16 × 12cm base for the work surface and weighs about 0.6kg. UnoPro Floor AN1460 has a taller upright and weighted floor base so it can stand beside the furniture.
Compact base. Flexible light. Accurate colour.
Make detailed work easier to see without crowding the table.
Place UnoPro beside the project, bring the wide shade into position and choose the brightness that feels right for the moment.