Choose a suitable edge
Attach the padded clip to a secure book cover, needlework frame, laptop surround or table edge that fits comfortably.
At only 0.13kg, Smart Clip-On turns a book, needlework frame, laptop or suitable table edge into a portable lighting station. Its flexible arm directs the beam over the detail, while three touch-controlled brightness levels and a rechargeable battery give you clear task light without occupying the work surface.
Only 0.13kg + rechargeable
Attach the padded clip to a secure book cover, needlework frame, laptop surround or table edge that fits comfortably.
Bend the arm gradually so the shade sits above the page, stitches or working area without blocking your hands.
Use the control on top of the clip to move through low, medium and high brightness, then switch off.
Smart Clip-On is designed for a small working area rather than general room illumination. The clip places the lamp directly beside the task, and the flexible neck brings its 6,000K light into position. That focused setup is especially useful when reading in a shared room, following a chart, stitching in a hoop or working from a temporary desk.
Daylight confirms three brightness levels but publishes a measured lux figure for the maximum setting only. Battery runtime also varies with the selected level and battery condition.
Attach to a suitable cover and angle the flexible arm across the page without lighting the whole room.
Clip to a secure section of the frame and direct extra light over stitches, symbols and thread changes.
Add light near a keyboard, notes or compact work area without using space for a conventional base.
Pack a 0.13kg rechargeable light for classes, holidays and temporary crafting locations.
Use the supplied cable with a compatible 5V computer or USB power source.
The charging indicator glows red and goes out when charging is complete.
Choose a firm edge the clip can hold without forcing or damaging it.
Shape the neck gradually and keep the lamp head clear of the work.
Cycle from low through medium and high, then touch again to switch off.
| Power detail | Published information | What it means |
|---|---|---|
| Cordless runtime | Up to approximately 4 hours | A maximum planning figure; selected brightness, battery age and use affect actual runtime. |
| Charge time | Approximately 2–3 hours | The red indicator goes out when a full charge has been reached. |
| Battery | Internal rechargeable lithium battery | No disposable batteries are required for normal use. |
| USB use | Compatible with a 5V USB source | Operate or charge from a suitable computer, USB supply or compatible phone-charger adaptor. |
| Charging cable | Approximately 1m USB cable supplied | Enough length for nearby charging without turning it into a permanently tethered lamp. |
| Energy consumption | 1.8W | Low-power integrated LED lighting in a compact portable format. |
Attaches directly to a suitable book, frame, laptop or table edge.
Brings the LED head over the exact area that needs illumination.
Low, medium and high settings controlled from the top of the clip.
Internal lithium battery provides up to approximately four hours.
Easy to pack and less demanding on suitable books or frames.
Supplied approximately 1m lead connects to a compatible 5V source.
The opening is approximately 2.5cm, but thickness alone does not guarantee a good grip—the edge shape and material also matter.
Smart Clip-On is designed to travel, charge and move between small tasks.
Choose this model for an ultra-light 0.13kg lamp that attaches directly to a book, frame, laptop or table edge.
Review Clip-On SpecsChoose Smart Go for a self-supporting rechargeable lamp with stronger 630-lux output, CRI 95+ light and longer battery runtime.
View Smart GoChoose Foldi Go when a taller folding structure and rotating head better suit your portable work area.
View Foldi Go| Brand / model | Daylight Smart Clip-On AN1380 |
|---|---|
| Product type | Rechargeable portable LED clip lamp |
| Light source | Integrated LED |
| Total light output | 85 lumens |
| Maximum illuminance at 30cm | 400 lux |
| Brightness levels | Three |
| Control | Touch control on top of clip |
| Colour temperature | 6,000K daylight |
| Colour rendering | CRI 80+ |
| Energy consumption | 1.8W |
| Battery | Internal rechargeable lithium battery |
| Maximum battery runtime | Up to approximately 4 hours |
| Published charge time | Approximately 2–3 hours |
| Charging indicator | Red while charging; switches off when full |
| Approximate clamp opening | Approximately 2.5cm |
| Positioning | Flexible arm |
| Weight | Approximately 0.13kg |
| Charging cable | Approximately 1m USB cable supplied |
| Finish | White |
Yes. It contains an internal rechargeable lithium battery and can be used cordlessly after charging.
Daylight publishes a maximum runtime of up to approximately four hours. Actual time varies with brightness, battery condition and use.
A full charge from a discharged battery takes approximately two to three hours. The red indicator goes out when charging is complete.
Yes. Daylight describes two power options: use the internal battery or connect the lamp to a compatible 5V USB source.
Yes. An approximately 1m USB charging cable is supplied. A wall-plug adaptor is not listed as included.
The maximum published output is 400 lux measured 30cm from the work, with a total light output of 85 lumens.
There are three touch-controlled settings: low, medium and high. Daylight publishes a measured lux figure for the maximum setting only.
The opening is approximately 2.5cm. Check the thickness, shape and strength of the surface and never force the clip onto an unsuitable edge.
No. The official AN1380 fact sheet lists CRI 80+. For higher colour fidelity, consider Smart Go AN1370, which is rated CRI 95+.
No. The lamp uses a fixed 6,000K daylight colour. The touch control changes brightness rather than light colour.
Smart Clip-On brings lightweight rechargeable illumination directly to a book, frame, laptop or compact work surface.