Preserve the workspace
The compact 2-in-1 mount secures at the table edge, leaving fabric, tools and project pieces free to spread out.
Daylight Slimline 4 A35109 | Brushed-steel table lamp
Wide, accurate task light—with almost no workspace sacrificed.
Slimline 4 combines a long, elegant brushed-steel profile with practical professional lighting. Clamp it at the edge of a sewing table, desk or craft bench, position the 48cm anti-glare shade with its dual flexible joints, then select one of four precisely measured brightness levels. The result is broad, even light exactly where detailed work happens.
- Up to 3,200 lux at 30cm for demanding close-detail work.
- Four published brightness levels provide useful control from 750 to 3,200 lux.
- CRI 95+ daylight LEDs help fabric, thread, paint and print colours look true to life.
- 48cm anti-glare shade distributes 1,000 lumens evenly across the task.
- Built-in 5V/2A USB-C port keeps compatible mobile devices charging beside the work.
3,200 lux + CRI 95+
3,200 luxmaximum at 30cm
4 levelsmeasured brightness choices
48cmlong anti-glare shade
USB-C5V/2A charging port
Clamp it at the edge and shape the light around the task
Use both flexible joints
Shape the lower and upper sections to adjust the height, forward reach and working angle.
Turn the long shade
Position the 48cm anti-glare head across the project for broad coverage without aiming the LEDs into your eyes.
A sleek lamp that works hard
Broad illumination without a bulky head or base.
The narrow 48cm shade carries its LED output along the full working area, while an anti-glare diffuser softens and evens the light. Because the lamp mounts at the edge rather than standing on a broad base, the visual profile stays light and the valuable centre of the table remains available for your project.
Choose the light intensity to match the detail
Maximum
Strongest output, measured 30cm from the work surface.Bright
Powerful task light with reduced intensity.Balanced
A comfortable mid-level for many everyday tasks.Gentle
Lowest published setting for lighter visual demands.All four values are Daylight’s published measurements at 30cm. Light reaching the work will vary when the shade is positioned closer or farther away.
A versatile light for the tasks that deserve a clearer view
Sewing + embroidery
Position the long shade across the machine bed or hoop to see stitches, markings and thread colour clearly.
Knitting + crafts
Bring consistent 6,000K light over yarn, tools and instructions while keeping the table surface open.
Drawing + colour work
Use CRI 95+ illumination when evaluating fine marks, surfaces and subtle colour differences.
Reading + office
Adjust height, angle and brightness for documents, keyboard work and focused everyday tasks.
Mount, connect, shape, aim and select
Choose the edge
Select a firm, flat surface within the 5.5cm clamp capacity.
Secure the mount
Fit the clamp squarely, or use the screwable mount where permanent installation is suitable.
Route the cable
Keep the 2m lead clear of cutting tools, needles and moving equipment.
Shape the joints
Support the lamp as you set height, forward position and shade angle.
Select brightness
Use the tactile switch to choose the lowest clear, comfortable level.
What the Slimline 4 specifications mean at your table
| Specification | Published value | Why it matters |
|---|---|---|
| Maximum illuminance | 3,200 lux at 30cm | Strong close-task brightness with the shade positioned near the working area. |
| Brightness range | 3,200 / 2,000 / 1,500 / 750 lux | Four measured choices rather than a simple unquantified high/low control. |
| Total light output | 1,000 lumens | Integrated LED output distributed along the 48cm shade. |
| Colour temperature | 6,000K daylight | A fixed crisp-white light colour for detailed visual work. |
| Colour rendering | CRI 95+ | High colour fidelity for fabrics, threads, paints, prints and beauty colours. |
| Energy consumption | 13.6W | LED operation for broad, bright illumination across the work surface. |
Thoughtful features keep the workstation practical
Anti-glare shade
Long full-width diffuser spreads the light evenly and softens direct LED glare.
Dual flexible joints
Shape the lamp around machines, desks and project layouts.
Tactile dimmer
Physical micro-switch cycles through four measured brightness levels.
Device charging
Integrated 5V/2A USB-C output for compatible mobile devices.
Flexible mounting
Use the table clamp or the screwable tabletop mounting configuration.
Mains cable
Continuous powered lighting without charging or battery-runtime limits.
The included 2-in-1 mount supports temporary or fixed installation
Use the clamp for simple, non-permanent placement
The clamp opens to approximately 5.5cm and suits a firm table or desk edge with clear contact above and below.
- Check for framing, drawers, lips and delicate finishes before mounting.
- Fit the clamp squarely so its surfaces make even contact.
- Tighten until stable without crushing or marking the furniture.
- Support the lamp when making large joint adjustments.
- Recheck the mount whenever the lamp is moved.
Use the screw mount only where appropriate
The second configuration can create a tidier fixed installation, but it requires a suitable surface and careful placement.
- Confirm permission before drilling or permanently modifying furniture.
- Check beneath the surface for cables, structure and obstructions.
- Follow the supplied mounting instructions and use appropriate tools.
- The optional weighted Slimline table base is not included.
- The optional Slimline magnifying arm is not included.
Keep a compatible device powered without another wall adaptor
| Feature | Published output | Practical note |
|---|---|---|
| Lamp charging port | USB-C, 5V / 2A | Provides up to 10W for compatible phones and other mobile devices. |
| Cable | Use a suitable USB-C charging cable | A device cable is not listed as part of the lamp package. |
| Compatibility | Depends on the connected device | Devices requiring other voltages or higher charging protocols may charge more slowly or may not charge. |
| Lamp power | Mains connection required | The lamp itself is not rechargeable; keep it connected for lighting and USB output. |
Slimline 4 Table, Lumi or UnoPro Table?
Slimline 4 Table A35109
Choose Slimline 4 for its brushed-steel finish, four measured levels, dual flexible joints and built-in USB-C charging.
Review Slimline SpecsLumi A35500
Choose Lumi when a 51cm shade, longer articulated reach and stronger 4,000-lux maximum suit a larger work surface.
View LumiUnoPro Table AN1450
Choose UnoPro when a lightweight movable lamp on a small freestanding base suits the way you work.
View UnoPro TableThe quick reference
| Brand / model | Daylight Slimline 4 Table A35109 |
|---|---|
| Product type | Clamp-mounted LED table task lamp |
| Light source | Integrated LED |
| Total light output | 1,000 lumens |
| Brightness levels at 30cm | 3,200 / 2,000 / 1,500 / 750 lux |
| Colour temperature | 6,000K daylight |
| Colour rendering | CRI 95+ |
| Energy consumption | 13.6W |
| Shade | Approximately 48cm with anti-glare diffuser |
| Positioning | Dual flexible joints |
| Control | Tactile four-step micro-switch |
| Charging port | USB-C, 5V / 2A output |
| Mounting | 2-in-1 table clamp and screwable tabletop mount |
| Maximum clamp opening | Approximately 5.5cm |
| Weight | Approximately 0.95kg |
| Cable length | Approximately 2m |
| Power source | Mains power; not rechargeable |
| Finish | Brushed steel |
| SKU | A35109 |
Daylight Slimline 4 A35109 FAQs
Does Slimline 4 include a freestanding table base?
No. This listing includes the 2-in-1 table clamp and screwable tabletop mount. Daylight lists a compatible weighted Slimline table base separately.
How bright are the four settings?
Daylight publishes 3,200, 2,000, 1,500 and 750 lux, with each level measured 30cm from the work surface.
Can the light colour be changed?
No. Slimline 4 uses a fixed 6,000K daylight colour. The micro-switch changes brightness rather than colour temperature.
What does CRI 95+ mean?
CRI describes how faithfully a light source renders colours. A rating above 95 is useful when comparing fabrics, threads, paint, print and beauty colours.
How large is the shade?
The long LED shade measures approximately 48cm and includes an anti-glare diffuser for a broad, even spread of task light.
How thick can the table be?
The table clamp opens to approximately 5.5cm. The mounting edge must also be flat, firm and clear enough above and below for secure contact.
What does the USB-C port provide?
The integrated port provides 5V/2A output, up to 10W, for compatible mobile devices. Charging speed depends on the device and cable.
Is the lamp rechargeable?
No. Slimline 4 is mains-powered through its approximately 2m cable. The USB-C feature is an output for charging a compatible device, not a battery input for the lamp.
Does it include a magnifier?
No. Daylight lists a compatible Slimline magnifying arm as an optional accessory, but it is not included with this lamp.
What is the difference between Slimline 4 and Lumi?
Slimline 4 has a narrower, refined brushed-steel profile, four measured brightness levels and USB-C charging. Lumi provides a larger professional arm system and a stronger 4,000-lux maximum for broad work areas.
Slim profile. Wide light. Precise control.
Give detailed work the light it deserves—without crowding the table.
Mount Slimline 4 at the edge, shape its dual joints around the project and select the brightness that makes every detail easier to see.