Daylight DuoPro Dual-Head LED Table Lamp

$159.00

Daylight DuoPro AN1550 | Dual-head LED table lamp

Spread bright, accurate light across more of your work—with fewer hard shadows.

DuoPro uses two independently positionable anti-glare shades to illuminate a wider project than a conventional single-head lamp. Open the twin shades across a sewing, drawing or treatment area, angle them from different directions or bring both beams together over a smaller detail—all from a stable table base.

  • Dual 56-LED shade design expands the illuminated working area and gives you two lighting angles.
  • Four brightness settings controlled by convenient touch switches on the lamp heads.
  • Maximum 2,100 lux at 30cm provides strong close-task illumination.
  • CRI 95+ daylight LEDs render fabrics, threads, paints and treatment colours faithfully.
  • Soft-touch flexible arm and pivoting heads make the light easy to position around each task.
Daylight DuoPro AN1550 dual-head LED table lampTwin shades + four brightness levels
2,100 luxmaximum at 30cm
56 LEDsacross two shades
95+ CRIhigh colour accuracy
0.8kglight, stable table format
Two shades, more control over the light

Spread, angle or concentrate the twin beams around your project

Spread wide

Cover a larger surface

Open the two shades apart to extend light across fabric, artwork, paperwork or a broad treatment area.

Angle separately

Light from two directions

Pivot each shade towards the work from a different angle to soften hard shadows around tools and hands.

Bring together

Concentrate on detail

Turn both heads towards a smaller zone when a stronger, more focused working area is useful.

Independent touch control

Use one shade or both, then choose from four brightness settings

01

Choose the active head

Operate either shade on its own for a smaller area or switch on both for the full twin-head effect.

02

Select the brightness

Each head offers four touch-controlled brightness settings for different tasks and surroundings.

03

Fine-tune the angle

Adjust the flexible arm and pivoting heads until light falls on the work rather than into your eyes.

Daylight publishes a maximum of 2,100 lux measured 30cm from the lamp. Separate lux figures for the three lower dimmer settings are not published.

Broad light without a bulky footprint

A slim table lamp that adapts to wider projects

DuoPro stands on a flat, sturdy base measuring approximately 16 × 12cm, keeping valuable worktop space available. The soft-touch arm bends smoothly, while the easy-twist shades pivot independently. At approximately 0.8kg, the complete lamp is light enough to reposition between suitable tables while remaining mains-powered for continuous use.

16 × 12cmCompact flat base footprint.
37cmApproximate published working height.
1.5m cableContinuous mains-powered operation.
14WEnergy consumption at the published specification.
Designed around detailed, colour-sensitive work

See more of the task across sewing, art, reading and treatments

Sewing + needlework

Spread the shades across fabric or angle them around hands, tools and the stitch line.

Drawing + painting

Illuminate a wider sheet and assess colour under fixed 6,000K, CRI 95+ light.

Reading + deskwork

Open both heads over documents, books, puzzles and detailed everyday tasks.

Beauty + nail work

Position two anti-glare shades around a treatment area for even, colour-accurate visibility.

A simple positioning workflow

Set the base, shape the arm and build the light around the task

1

Place the base

Use a firm, level surface with room for the arm and both shades to move.

2

Raise the arm

Support the base and guide the soft-touch flexible arm over the working area.

3

Open the shades

Spread them wide for coverage or bring them closer over a smaller task.

4

Angle each head

Pivot the shades to reduce unwanted shadows and direct glare away from your view.

5

Set each level

Use the independent touch controls to select the brightness you need.

Lighting figures made clear

What the DuoPro table-lamp measurements mean

Specification Published value What customers should know
Maximum illuminance 2,100 lux at 30cm Measured close-task brightness with the lamp positioned 30cm from the working surface.
Brightness control Four levels per shade The two heads can be controlled independently; individual lux figures for lower levels are not published.
LED arrangement 56 LEDs / twin shades Two elongated light sources increase coverage and let light approach from different angles.
Colour temperature 6,000K daylight A fixed crisp-white light colour; brightness changes but colour temperature does not.
Colour rendering CRI 95+ High colour fidelity for comparing fabric, thread, paint, print and treatment colours.
Power 14W / mains operation Continuous connected use; this table model is not rechargeable.
DuoPro AN1550 design features

A complete dual-head table-lighting setup

×2

Twin LED shades

Two elongated anti-glare heads containing 56 high-quality LEDs.

Touch dimmers

Four brightness settings with independent head control.

PIVOT

Easy-twist head joints

Pivot each shade separately to shape the illuminated area.

FLEX

Soft-touch flexible arm

Guides both shades above the project and holds their position.

BASE

Flat stable base

Approximately 16 × 12cm footprint for table and desk use.

1.5m

Mains cable

Continuous powered operation without charging or battery limits.

Positioning, cleaning and cable care

Support the base whenever the arm or shades are adjusted

Shape the light without forcing the joints

The flexible arm and pivoting shades are intended to move, but deliberate adjustment helps protect the lamp and maintain stability.

  • Hold the base while changing the arm position.
  • Move the flexible arm gradually rather than sharply bending one point.
  • Rotate each shade through its natural range without forcing the joint.
  • Keep both heads clear of loose fabric, liquids and unstable items.
  • Switch off and allow the lamp to cool before wiping with a soft dry cloth.

Plan the mains connection

DuoPro Table is lightweight enough to move, but it remains a plug-in lamp with a 1.5m cable.

  • Place the base completely on a stable, level surface.
  • Keep the cable away from walkways and table edges.
  • Do not lift or reposition the lamp by its cable.
  • Keep the adaptor and connections dry.
  • Disconnect power before cleaning or moving to another workspace.
Choose the right DuoPro format

DuoPro Table, DuoPro Floor or UnoPro Table?

Stable desktop choice

DuoPro Table AN1550

Choose this model for a twin-head, four-level lamp with a compact weighted base that can move between desks and tables.

Review Table Specs
Freestanding floor choice

DuoPro Floor AN1560

Choose the floor model when light needs to stand beside a chair, machine or table without using the work surface.

View DuoPro Floor
Single-head table choice

UnoPro Table

Choose UnoPro when a simpler single-shade table lamp is enough and the extra spread of twin heads is not required.

View UnoPro Table
Daylight DuoPro AN1550 specifications

The quick reference

Brand / model Daylight DuoPro Table AN1550
Product type Dual-head LED table lamp
Light source 56 integrated LEDs across two shades
Shade design Twin anti-glare shades with pivoting joints
Brightness levels Four per shade
Head control Independent touch controls
Maximum illuminance at 30cm 2,100 lux
Colour temperature 6,000K daylight
Colour rendering CRI 95+
Energy consumption 14W
Arm Soft-touch flexible arm
Approximate working height 37cm
Approximate twin-shade width 28cm
Base footprint Approximately 16 × 12cm
Weight Approximately 0.8kg
Cable length Approximately 1.5m
Power source Mains power; not rechargeable
Finish White
Frequently asked questions

Daylight DuoPro AN1550 table-lamp FAQs

Can the two lamp heads be controlled separately?

Yes. Each shade has its own touch control and four brightness settings, so you can use one head or both and set them independently.

How bright is DuoPro Table?

Daylight publishes a maximum of 2,100 lux measured 30cm from the working surface.

What are the four individual lux levels?

Four brightness settings are provided, but Daylight publishes only the maximum 2,100-lux measurement for this model. Separate measured values for the lower levels are not listed.

How do the twin shades help reduce shadows?

They can illuminate the work from two different angles. Positioning one shade on each side of hands or tools can soften the single hard shadow created by a conventional one-head lamp.

Is DuoPro Table rechargeable?

No. It is a mains-powered table lamp with an approximately 1.5m cable, providing continuous operation without battery-runtime limits.

Can the colour temperature be changed?

No. The LED colour is fixed at 6,000K daylight. The touch controls adjust brightness only.

What does CRI 95+ mean?

CRI measures how faithfully a light source renders colours. A rating above 95 is useful when comparing fabrics, threads, paints, prints and treatment colours.

Does this lamp include magnification?

No. DuoPro is a broad dual-head task lamp without a lens. Choose a Daylight magnifying lamp when enlargement is required.

How much desk space does the base need?

The flat base occupies approximately 16 × 12cm. Leave additional clearance for the flexible arm and both pivoting shades.

Is this the DuoPro floor model?

No. This is DuoPro Table AN1550 with a desktop base. DuoPro Floor AN1560 is a separate freestanding model for use beside a chair, machine or table.

Two shades. Four levels. A wider working view.

Build the light around the project instead of working around one fixed beam.

Spread DuoPro across a broad surface, angle the shades from two directions or bring both heads together over fine detail.