Control the thread end
The flexible clamp wraps around the wound bobbin so the outer layers are less likely to loosen in storage.
Stop wound bobbins unravelling in the drawer
Clip the thread in place and keep bobbins tidy
The Gypsy Quilter Tulip Bobbin Clamps wrap around A / Class 15 and L bobbins to help stop thread ends unwinding. The flexible rubber grip adjusts as the amount of thread changes, while two included ball chains let you group several colourful clamps together for organised storage.
- Control loose bobbin thread before it tangles with other colours and notions.
- Fits popular bobbin types including A / Class 15 and L bobbins.
- Twelve reusable rubber clamps in an easy-to-see assorted colour mix.
- Two 6-inch storage chains help keep several clamped bobbins together.
12 clamps + 2 chains
12 clampsAssorted pack
15/A & LCompatible bobbins
Flexible rubberReusable thread control
TGQ016Manufacturer code
Please note: the bobbins and thread shown in the official photography demonstrate the clamps in use and are not included. This pack contains 12 assorted clamps and two ball chains.
Keep wound bobbins from turning into loose nests of thread
A loose thread end can unwind as a bobbin rolls through a drawer, project box or machine bag. A Tulip Clamp sits around the wound thread and applies gentle holding pressure, helping the bobbin stay neater and easier to identify when you need it again.
See stored bobbins quickly
Bright pink, orange, green and blue clamps are easy to spot in drawers, organisers and project bags.
Reuse after every colour
Remove the clamp before sewing, then fit it to another compatible wound bobbin when the job is finished.
A shaped rubber clamp that hugs the bobbin
Open, position and release
Three simple steps to control a loose bobbin
Use gentle pressure and confirm the clamp sits securely without crushing, distorting or damaging the bobbin or thread.
Check the bobbin type
Confirm that the wound bobbin is an A / Class 15 or L style and that it is free of cracks, sharp edges or damage.
Open and position
Gently flex the Tulip Clamp and guide it around the wound thread, keeping the thread end beneath the holding area.
Store or add to a chain
Place the secured bobbin in your organiser, or thread the clamp onto an included ball chain to group several together.
Before sewing: remove the Tulip Clamp and chain before placing the bobbin into a sewing machine. These are storage organisers, not machine attachments.
Check the bobbin class rather than relying on appearance
Manufacturer-specified fit
- A-style / Class 15 bobbins
- Class L bobbins
- Wound metal or plastic bobbins with the specified size profile
- Bobbins holding anything from a small amount to a fuller wind
- Domestic sewing, quilting or embroidery storage
Do not assume a fit for
- Class 66 bobbins
- Class M industrial bobbins
- Prewound bobbins with a different profile
- Specialty bobbins outside the specified dimensions
- Damaged, cracked or distorted bobbins
Not sure which bobbin you use? Check the sewing-machine manual or the bobbin packaging. Similar-looking bobbins can differ in diameter, height and side profile.
Group several clamped bobbins without filling another box
Use the ball chains to
- Keep a small project palette together
- Group bobbins by thread type or machine
- Hang secured bobbins from a suitable organiser
- Carry selected colours inside a project bag
Chain storage reminders
- Close the connector securely before lifting
- Do not overload or force the chain
- Keep the small chain and clamps away from children and pets
- Remove every clamp and chain before machine use
Official 26-second demonstration
See a Tulip Clamp grip the wound bobbin
The manufacturer video shows the single TGQ015 clamp and the TGQ016 12-piece pack. This listing is specifically for one sealed TGQ016 bag containing 12 clamps and two chains.
Tulip Clamps, Bobbinis and Thread Peels solve different storage problems
| Product | What it organises | Best reason to choose it |
|---|---|---|
| Tulip Bobbin Clamps TGQ016 | Loose wound A / Class 15 and L bobbins | Helps stop the thread from unwinding around the bobbin |
| Bobbini Holders TGQ018 | A wound bobbin and its matching thread spool | Keeps the bobbin attached to the spool that filled it |
| Thread Peels TGQ014 | Loose thread ends on spools | Wraps around the spool to control the outer thread layers |
The Gypsy Quilter Tulip Bobbin Clamp specifications
| Brand | The Gypsy Quilter |
|---|---|
| Product | Tulip Bobbin Clamps |
| Manufacturer code | TGQ016 |
| Barcode / UPC | 743285010288 |
| Pack size | 12 clamps |
| Material | Flexible rubber |
| Colours | Assorted blue, green, orange and pink; the exact mix may vary |
| Bobbin compatibility | A / Class 15 and L bobbins |
| Approximate clamp size | 0.875 x 1.25in, approximately 22 x 32mm |
| Storage chains | 2 x 6in ball chains included, approximately 15cm each |
| Purpose | Helps stop wound bobbin thread unwinding during storage |
| Reusable | Yes |
| Not included | Bobbins, thread and other photographed demonstration items |
Keep the rubber clean, dry and flexible
Wipe away lint
Use a soft, lightly damp cloth if thread lint or dust collects, then allow the clamp to dry completely.
Avoid harsh products
Keep the rubber away from solvents, oils and abrasive cleaners that could damage or mark the material.
Store away from heat
Keep unused clamps in a cool, dry place away from prolonged direct sunlight and discontinue use if the rubber tears or hardens.
Tulip Bobbin Clamp FAQs
How many clamps are included?
This TGQ016 manufacturer bag contains 12 reusable rubber Tulip Bobbin Clamps.
Are the two chains included?
Yes. The 12-piece bag includes two 6-inch ball chains for grouping several clamps and bobbins in storage.
Are bobbins included?
No. The bobbins and thread shown in the official images demonstrate how the clamps work. This listing is for 12 clamps and two chains.
Which bobbin classes fit?
The manufacturer specifies A / Class 15 and L bobbins. Check the bobbin class in your sewing-machine manual because visually similar bobbins can have different dimensions.
Do they fit Class M bobbins?
Class M is not listed for Tulip Clamps. Choose a product specifically confirmed for Class M bobbins rather than forcing the rubber.
Which colours will I receive?
The pack contains assorted blue, green, orange and pink clamps. The exact quantity of each colour may vary.
Will a clamp fit a nearly empty bobbin?
The flexible design is intended to grip bobbins with different amounts of wound thread. Confirm that it sits securely without crushing or distorting the bobbin.
Can I leave the clamp attached while sewing?
No. Remove the clamp and any chain before placing the bobbin into the sewing machine.
What is the difference between TGQ015 and TGQ016?
TGQ015 is a single Tulip Clamp. TGQ016 is the sealed 12-piece assorted bag supplied with two storage chains.
What is the difference between Tulip Clamps and Bobbinis?
A Tulip Clamp wraps around a loose wound bobbin to help stop its thread unwinding. A Bobbini connects the wound bobbin to its matching thread spool.
How should I clean them?
Wipe with a soft, lightly damp cloth, dry completely and avoid solvents, oils and abrasive cleaners.
Are they safe for children?
They are sewing-room organisers rather than toys. Keep the small clamps and chains securely away from children and pets.
Grip the bobbin before the thread gets away
Add a bright Tulip Clamp to each compatible wound bobbin, then use the included chains or your favourite organiser to keep the whole group tidy and ready.
Review the Three Steps