For stable fabrics
A useful starting point for embroidery on stable woven fabrics, from monograms to decorative stitch patterns.
A firm, medium-weight embroidery stabiliser for projects that need more support during stitching, with excess backing that tears away afterwards.
Choose this 50cm-wide, 10m roll when you want more cutting room for your embroidery projects.

A useful starting point for embroidery on stable woven fabrics, from monograms to decorative stitch patterns.
Use beneath machine appliqué, satin stitching and designs that need a firmer foundation than a lightweight tear-away.
Cut from the roll to suit your hoop or sewing area. Test extra layers where the design needs more support.
| Supplied | One 50cm × 10m roll in your selected colour |
|---|---|
| Type | Tear-away backing |
| Weight | 50 g/m² |
| Material | 75% cellulose, 25% polyester |
| Finish | Non-adhesive; not iron-on |
| Product code | White: 3000046 · Black: 3000047 |
Choose white or black using the colour selector above. Each selection is for one roll, not a mixed pack.
Check the roll width against the area you need to cover, including enough material for secure hooping where required.
Tear-away is temporary support, not a wash-away film. Backing can remain within the stitched area. For stretchy fabrics or designs needing lasting support, consider a cut-away.
No. Choose Filmoplast if you need a sticky surface to hold a small or difficult-to-hoop item.
Yes. Place it underneath the stitching area to support appliqué, buttonholes or decorative stitches, then remove the excess carefully.
Other roll sizes: Sulky Tear Away Plus 25cm × 10m · Sulky Tear Away Plus 50cm × 25m.
Related options: Sulky Super Strong 25cm × 5m · Sulky Filmoplast 25cm × 5m.
Explore the Sulky stabiliser range for tear-away, cut-away, wash-away and finishing products.