Micro Top MT260LH · Long-arm end cutter
A straight finish.
A smoother cutting routine.
Make repeated fabric end cuts part of a dedicated workroom setup. The Micro Top MT260LH combines a powered round blade with manual, rail-guided movement, helping you cut across the end of your fabric lay without steering a cutter freehand.
Supplied with a 3.5m rail, this long-arm model is suited to sewing and garment-production workrooms preparing fabric for the next stage of cutting.
Purpose-built for fabric end cutting
Powered cutting. Hands-on control.
Manual does not mean an unpowered blade. The motor drives the cutting blade while you guide the cutter along its rail. This is an end-cutting setup for straight cuts across fabric, rather than a freehand cutter for following pattern curves.
Long-arm handling
The MT260LH is Micro Top’s long-arm version, with an extended operating handle for moving the cutting head along the guide rail.
110mm powered blade
A 100W cutting head drives the round blade. Rated cutting capacity is 12mm; the workable thickness depends on your material and how it is laid.
A guided cutting path
The rail provides a defined path across your table setup, useful when repeated end cuts are part of your fabric-preparation routine.
Guard and counter
An enclosed blade guard and counter are included in the manufacturer’s specification. Always operate with the guards in place and follow the supplied instructions.
The essentials at a glance
MT260LH specifications
- Brand and model
- Micro Top MT260LH / MT-260LH
- Configuration
- Long-arm manual end cutter
- Supplied rail length
- 3.5m
- Blade
- 110mm round blade
- Power rating
- 100W
- Rated cutting capacity
- 12mm, subject to material and lay
- Cutting-head movement
- Manually guided along the rail
- Included features
- Enclosed blade guard and counter
Match the rail to your workroom
The 3.5m measurement is rail length, not a guaranteed usable cutting width. Tell us your table width, fabric width and material type so we can confirm the mounting arrangement and suitable setup. Electrical supply requirements also need to be confirmed before ordering.
Enquire with our team for availability, lead time and delivery options.
Product information & care
Disconnect power before blade changes or maintenance. Follow the manufacturer’s operating instructions for safe use and care.