Elongated eye
The longer opening gives metallic thread an easier path through the needle during rapid stitch cycles.
Madeira 9451 · Metallic embroidery needles
Help metallic thread flow smoothly from eye to stitch
Madeira Metallic Embroidery Needles 9451 combine an elongated, specially coated eye with a specialised scarf. Designed for metallised embroidery threads, these size 90/14 needles help reduce friction, skipped stitches and thread breaks across domestic machine-embroidery projects.
- Five size 90/14 needles supplied in one card.
- Elongated, specially coated eye supports metallic-thread flow at every stitch speed.
- Specialised scarf helps prevent skipped stitches and thread breaks.
5
needles per pack
90/14
one specialist size
Coated Eye
elongated for thread flow
9451
Madeira article number
Specialist geometry for a delicate, reflective thread path
Metallised threads can be more sensitive to friction, twist and repeated bending than everyday embroidery thread. Madeira gives article 9451 two purpose-designed features to help the thread travel cleanly and form dependable stitches.
Special eye coating
The coated surface is designed to support smooth thread flow and reduce damaging friction.
Specialised scarf
The scarf supports the needle-and-hook timing needed to help prevent skipped stitches and thread breaks.
One needle for several distinctive metallic effects
Madeira recommends article 9451 for multiple metallic and metal-effect thread families. Always confirm the specific thread’s instructions because weight, construction and ideal embroidery settings vary.
Metallic 40
Brilliant, Sparkling, Smooth and Soft effects
Heavy Metal 30
Hardwearing metallic embroidery
Spectra
Holographic sparkle and wide satin stitches
GoldenSilver
Precious metallic decorative effects
Metallic threads are not all identical. Follow the recommendation supplied with the exact thread. Some very fine fabrics or specialist constructions may call for another needle despite the shared metallic appearance.
Five identical 90/14 needles in every pack
90/14
NM 90 · American size 14
Space and strength for metallised thread
The first number is the metric NM size and the second is the American size. All five needles are NM 90 / size 14; this is not an assorted-size card.
Madeira identifies 90/14 as the recommended needle for many of its metallic thread families. Confirm that the machine accepts this needle format and size before use.
Four setup checks for metallic embroidery
Fit a fresh needle
Madeira recommends changing the needle with every new project for best results.
Reduce the speed
Madeira recommends a low embroidery speed for metallised threads to limit stress and friction.
Review top tension
Metallic thread often benefits from reduced tension; follow the thread and machine guidance.
Run a full sample
Test the intended fabric, stabiliser, bobbin thread, design density and thread-delivery path together.
Let the thread unwind freely: position the spool as recommended for its construction, keep the thread path unobstructed and stop if the metallic surface begins to strip or fray.
Madeira Metallic Embroidery Needles 9451 at a glance
| Brand | Madeira |
|---|---|
| Product | Metallic machine-embroidery needles |
| Article number | 9451 |
| Pack contents | 5 needles, all NM 90 / size 14 |
| Eye | Elongated and specially coated for metallic-thread flow |
| Scarf | Specialised scarf designed to help prevent skipped stitches and thread breaks |
| Primary use | Machine embroidery with metallised and compatible metal-effect threads |
| Machine compatibility | Front-to-back threading household sewing and embroidery machines, plus suitable Brother PR models; check the exact machine manual |
| Barcode / GTIN | 4003760994516 |
Madeira 9451 metallic needle FAQs
How many needles are in the Madeira 9451 pack?
There are five identical metallic machine-embroidery needles, all in size 90/14.
Why is the needle eye elongated and coated?
The eye is designed to give metallised thread a smoother path through the needle, helping reduce friction, surface damage and thread breaks.
Why does the specialised scarf matter?
It supports the close interaction between the needle and machine hook during stitch formation, helping to reduce skipped stitches and thread breaks.
Can I use these needles with every metallic thread?
They suit many metallised threads, including several Madeira ranges, but always follow the needle recommendation for the exact thread type and weight.
Should metallic embroidery run more slowly?
Yes. Madeira recommends low speed and reduced thread tension for its metallised threads. Test and adjust within your machine and thread manufacturers’ guidance.
Will these fit every domestic sewing machine?
Madeira specifies front-to-back threading machines, but you should still confirm the accepted needle type and size in your exact sewing or embroidery machine manual.
Do I need stabiliser?
Use stabiliser when the fabric and design require it. The correct backing helps control fabric movement while the metallic needle manages the upper-thread path.
When should I replace the needle?
Madeira recommends a fresh needle for every new project. Replace it sooner if it bends, becomes blunt or damaged, or if stitch quality deteriorates.
Give metallised embroidery thread a smoother path through every stitch
Madeira 9451 supplies five size 90/14 needles with an elongated coated eye and specialised scarf for dependable metallic machine embroidery.