Hoop clearance
The raised neck helps the handles clear the edge of an embroidery frame while the blades reach towards the design.
Madeira 9491 · Large double-curved scissors
Reach across the hoop and trim precisely at the stitch
Madeira 9491 are large, chrome-plated embroidery scissors with a double-curved profile. The raised handle gives your fingers clearance above the work while the curved tips approach threads close to fabric, stitching and embroidery frames.
- Double-curved neck and tips designed for easier access around embroidery hoops.
- Precise cutting to the points for controlled thread, yarn and floss trimming.
- Large chrome-plated model measuring approximately 14 cm overall.
Double Curve
raised neck and curved tips
Approx. 14 cm
large overall length
Chrome
plated finish
9491
Madeira article number
This is Madeira’s large article 9491 model—not the smaller gold-plated 9478 scissors. Madeira’s main catalogue lists 9491 at approximately 14 cm / 5.5 inches; some regional Madeira material markets the model as 5 inches.
Why both the neck and the tips are curved
The two curves solve different access problems. The shaped neck keeps the handles and your fingers above the fabric and hoop, while the curved cutting end lets the tips approach the thread without pressing the full hand down onto the embroidery.
Hands above the work
The double-curved handle profile helps keep fingers from resting directly on delicate fabric and finished stitches.
Curved-point control
The shaped points support careful trimming close to embroidery while helping reduce accidental contact with fabric or stitches.
Protect the embroidery as well as the blade. Work slowly, keep the tips visible and never pull a thread taut against the fabric before cutting.
For thread trimming where reach and visibility matter
Madeira specifies these scissors for cleanly nipping threads, yarns and floss, including hard-to-reach areas. They are a finishing tool for controlled cuts—not general-purpose household shears.
Reach across a hooped design and trim accessible connecting threads close to the stitch line.
Use the precision points for neat finishing cuts without leaving an unnecessarily long fuzzy tail.
The offset shape improves access where straight scissors would force the hand or handles against the frame.
Not intended for heavy cutting. Avoid paper, wire, pins, thick plastic and other materials that can nick or dull a precision embroidery edge.
Use the curve without losing sight of the points
Stabilise the work
Keep the hoop or fabric supported so the embroidery cannot shift towards the blades.
Approach from above
Use the raised handle to clear the frame and bring the curved tips into view.
Cut one target
Separate the intended thread from nearby loops and fabric before closing the blades.
Check the finish
Inspect the stitch area before making another cut or turning the hoop.
Keep the scissors clean, dry and dedicated to thread
| Care step | What to do | Why it matters |
|---|---|---|
| After use | Wipe away lint and thread fragments with a clean, dry cloth. | Debris near the pivot can make the action feel rough and reduce control. |
| Storage | Store dry with the blades closed and the points protected from knocks. | The fine tips and cutting edges can be damaged by contact with harder tools. |
| Sharpening | Use a professional familiar with small precision and curved scissors. | The double-curved alignment needs to be preserved for the blades to meet correctly. |
Madeira Double-Curved Embroidery Scissors 9491 at a glance
| Brand | Madeira |
|---|---|
| Product | Large double-curved embroidery scissors |
| Article number | 9491 |
| Overall length | Approximately 14 cm / 5.5 in in Madeira’s catalogue; marketed as 5 in by Madeira UK |
| Finish | Chrome plated |
| Shape | Double-curved neck and curved precision points |
| Cutting performance | Designed for precise cutting through to the tips |
| Recommended use | Trimming embroidery thread, yarn and floss, especially around hoops and hard-to-reach areas |
| Pack contents | 1 pair of scissors |
| Barcode / GTIN | 4003760994905 |
Madeira 9491 embroidery scissors FAQs
What does double curved mean?
The scissors have an offset curve through the neck and handles plus curved cutting tips. This raises your hand above the hoop while the points reach towards the thread.
How large are Madeira 9491 scissors?
Madeira’s catalogue lists them at approximately 14 cm / 5.5 inches overall. Madeira UK markets article 9491 as a 5-inch model, so “large” and the 9491 article number are the clearest identifiers.
Are these the smaller gold-plated Madeira scissors?
No. Article 9491 is the large chrome-plated model. Madeira article 9478 is the smaller gold-plated double-curved design.
What can I cut with them?
Madeira specifies thread, yarn and floss. They are especially useful for precise embroidery finishing and hard-to-reach areas around a hoop.
Can I cut stabiliser with them?
They may trim light stabiliser carefully, but preserving the precision edge for thread is the better choice. Use suitable general or appliqué scissors for extensive backing removal.
Will the curved tips guarantee I cannot cut the fabric?
No. The shape helps with access and control, but the tips are still sharp. Keep them visible, isolate the thread and cut slowly.
Are the scissors chrome plated?
Yes. Chrome plated is the finish specified by Madeira for article 9491.
How should I store them?
Keep them clean and dry with the blades closed and the precision points protected. Avoid loose storage beside heavy metal tools.
Bring the points to the thread—not your hand onto the embroidery
Madeira 9491 combines a raised double-curved profile, precise cutting points and a chrome-plated finish in the brand’s large professional embroidery-scissor model.