Reach over the hoop
The double curve helps the finger loops clear the edge of a hand or machine embroidery frame.
Madeira 9478 · Compact double-curved scissors
Compact hoop-side trimming with your fingers above the fabric
Madeira 9478 are compact double-curved embroidery scissors with raised finger loops, fine cutting points and a 24-carat gold-plated surface. At approximately 9 cm overall, they are made for controlled thread trimming around hand and machine embroidery hoops.
- Double-curved profile reaches over a hoop while keeping the hand above the work.
- Precise fine tips for close trimming of thread, yarn and floss.
- Compact 9 cm model with a 24-carat gold-plated finish.
Double Curve
raised loops and curved tips
Approx. 9 cm
compact overall length
24 Carat
gold-plated surface
9478
Madeira article number
This is Madeira’s compact article 9478 model—not the large chrome-plated 9491 scissors. Madeira’s main catalogue lists 9478 at approximately 9 cm / 3.5 inches; Madeira UK markets the same article as 4 inches.
Raised finger loops create working clearance
The offset profile lifts the handles away from the fabric while the fine curved tips stay close to the trimming point. Madeira also describes the compact scissors as lightweight and easy to pick up, with access suitable for difficult areas and even beneath a presser foot when the machine is safely stopped.
Keep fingers off the fabric
The raised handle helps prevent your hand from resting directly on delicate fabric and finished stitches.
Cut to the points
Madeira specifies precise cutting through to the tips for neat, controlled thread finishing.
The curve improves access, not immunity from mistakes. Keep the points visible, isolate the target thread and cut slowly near fabric or embroidery stitches.
For fine thread trimming in close working areas
Madeira recommends the 9478 scissors for cleanly nipping thread, yarn and floss, particularly where a straight pair would place the fingers or handle against the fabric, hoop or machine.
Reach over a hooped design and trim accessible connecting threads close to their stitch points.
The compact raised shape can access tight machine areas after the machine is fully stopped and the needle is raised.
Use the fine points for thread, floss and small detailed trimming around a hand-held hoop.
Protect the precision edge. Avoid paper, pins, wire, thick plastic and other materials that can nick or dull small embroidery scissors.
Choose compact gold or large chrome for your working style
| Model | Madeira 9478 | Madeira 9491 |
|---|---|---|
| Size | Compact, approximately 9 cm / 3.5 in | Large, approximately 14 cm / 5.5 in |
| Finish | 24-carat gold plated | Chrome plated |
| Best fit | Small, lightweight precision tool for close hoop and machine access | Longer reach and larger finger loops for customers who prefer a full-size tool |
Use the compact points without losing control
Stop the machine
Switch off or fully stop the machine and raise the needle before reaching near the presser foot.
Support the work
Keep the hoop stable so the fabric cannot move upwards towards the cutting points.
Separate the thread
Confirm that only the intended thread, yarn or floss sits between the blades.
Make one clean cut
Close the blades without twisting, then inspect the area before trimming again.
Madeira Double-Curved Embroidery Scissors 9478 at a glance
| Brand | Madeira |
|---|---|
| Product | Compact double-curved embroidery scissors |
| Article number | 9478 |
| Overall length | Approximately 9 cm / 3.5 in in Madeira’s catalogue; marketed as 4 in by Madeira UK |
| Finish | 24-carat gold plated |
| Shape | Raised double-curved handle with fine curved cutting points |
| Cutting performance | Designed for precise cutting through to the tips |
| Recommended use | Trimming embroidery thread, yarn and floss around hand or machine hoops and in hard-to-reach areas |
| Pack contents | 1 pair of scissors |
| Barcode / GTIN | 4003760994783 |
Madeira 9478 embroidery scissors FAQs
What does double curved mean?
The handle is offset upwards and the cutting tips are curved. This lets the loops clear the hoop while the points approach the thread.
How large are Madeira 9478 scissors?
Madeira’s catalogue lists them at approximately 9 cm / 3.5 inches overall. Madeira UK markets article 9478 as a 4-inch model, so “compact” and the article number are the clearest identifiers.
Are they actually 24-carat gold?
Madeira specifies a 24-carat gold-plated model. This describes the surface finish; the scissors are not made from solid gold.
What is the difference between 9478 and 9491?
Both are double curved. The 9478 is the compact gold-plated model, while 9491 is Madeira’s larger chrome-plated version.
Can I use them under a presser foot?
Madeira specifically highlights access under the presser foot. Fully stop the machine, raise the needle and keep the cutting points clear of machine parts and fabric.
Will the curved tips prevent every accidental fabric cut?
No. The shape improves access and control, but the points remain sharp. Keep them visible and separate the thread from the fabric before cutting.
Can they cut stabiliser?
They may handle occasional light stabiliser trimming, but dedicating the fine edge to thread is better. Use suitable general or appliqué scissors for extensive backing removal.
How should I store them?
Keep them clean and dry with the blades closed and the fine points protected from contact with heavier tools.
Put fine gold-plated points exactly where the thread ends
Madeira 9478 combines a lightweight compact size, raised double-curved profile and precise cutting tips for controlled embroidery finishing.