Cleaner rotary cuts
Help the ruler resist sideways movement while cutting strips, squares, blocks and patchwork shapes.
A little more grip for more confident cutting
Help your quilting ruler stay exactly where you placed it
The Gypsy Quilter Stuck On You Grip Hearts add clear silicone traction to the underside of quilting rulers and templates. Choose a large or small heart, position it away from important markings and help reduce the sideways slip that can spoil an accurate cut.
- 24 large grip hearts for rulers and templates with broader open areas.
- 24 small grip hearts for compact templates or spaces between markings.
- Clear silicone material helps preserve visibility through acrylic tools.
- Self-adhesive application makes it easy to add traction where it is needed.
24 Large + 24 Small
24 LargeClear silicone hearts
24 SmallFor compact spaces
48 GripsTotal usable pieces
TGQ101Manufacturer code
Small grips that solve a very familiar quilting frustration
Even a carefully aligned ruler can creep when hand pressure changes or the rotary cutter reaches the far end of a cut. A balanced set of grip hearts adds extra contact with the fabric while leaving most of the clear ruler surface unobstructed.
Steadier templates
Add traction to specialty acrylic templates that are small, curved or awkward to hold securely.
Clearer positioning
The transparent silicone is less visually intrusive than opaque pads when placed away from essential markings.
Choose the heart that suits the available space
For broader open areas
Use the larger grips near the corners and along the length of standard quilting rulers or beneath larger templates.
For compact or busy areas
Use the smaller grips on little templates or between closely spaced numbers, lines and registration points.
Keep the ruler level: distribute grips evenly and use matching sizes at the main contact points. An unbalanced layout can let a ruler rock instead of resting flat.
A careful five-step setup
Clean, plan, peel, press and test
Start with only the number of hearts needed to steady the tool. Good placement adds traction without hiding the ruler information you rely on.
Clean the underside
Follow the ruler maker's care advice. Remove lint and oil, then let the acrylic surface dry completely.
Plan the positions
Choose clear areas near corners, ends or pressure points without covering key lines, numbers or holes.
Select the size
Use large hearts where space allows and small hearts on compact templates or busier ruler sections.
Peel and press firmly
Lift the chosen grip from its backing, place the adhesive side on the ruler underside and press it completely flat.
Test before cutting
Set the ruler on scrap fabric, confirm it rests level and check that the grips contact the surface evenly.
Match the layout to the ruler or template
Long rulers
- Begin near the ends and corners
- Add evenly spaced hearts along the length
- Check the middle does not lift or flex
- Keep cutting-edge markings visible
Square rulers
- Place grips in balanced positions
- Support all four corners where possible
- Avoid a layout that encourages rocking
- Test at different ruler orientations
Small templates
- Try the small hearts first
- Keep registration holes clear
- Avoid covering narrow seam guides
- Use only enough grips for stable contact
Rotary-cutting safety: grip hearts help reduce slip but do not make a ruler immovable. Keep fingers safely behind the ruler edge, use firm downward pressure, cut away from your body and stop if the ruler shifts.
Official TGQ101 demonstration
See Stuck On You Grip Hearts in use
The manufacturer video shows how the clear adhesive hearts add small, strategic contact points beneath a quilting ruler.
The Gypsy Quilter Stuck On You Grip Hearts specifications
| Brand | The Gypsy Quilter |
|---|---|
| Product | Stuck On You Grip Hearts |
| Manufacturer code | TGQ101 |
| Barcode / UPC | 743285011810 |
| Large grips | 24 clear adhesive silicone hearts |
| Small grips | 24 clear adhesive silicone hearts |
| Total usable pieces | 48 |
| Colour | Clear |
| Material | Silicone |
| Product style | Self-adhesive heart-shaped grips |
| Primary use | Adding traction beneath compatible quilting rulers and templates |
| Included | One sheet with 24 large and 24 small grip hearts |
Grip Hearts or No-Slip Grip Dots?
Stuck On You Grip Hearts TGQ101
- Clear silicone material
- Heart-shaped design
- 24 large and 24 small hearts
- A playful choice for rulers and templates
No-Slip Grip Dots TGQ022
- Clear plastic material
- Round ring-and-centre design
- 24 large rings and 24 small centre dots
- A simple circular alternative
Replace hearts that become dirty, damaged or loose
Keep the contact face clean
Brush away lint gently so the silicone can continue making even contact with fabric.
Inspect before cutting
Replace any heart that curls, lifts, tears or lets the ruler rock. Never cut with a visibly unstable setup.
Protect acrylic rulers
When removing old adhesive, follow the ruler manufacturer's cleaning directions and avoid solvents that may craze or cloud acrylic.
Stuck On You Grip Hearts FAQs
How many grip hearts are included?
The pack contains 24 large hearts and 24 small hearts, giving 48 usable grips in total.
Where do I attach them?
Apply them to clean, dry areas on the underside of a compatible quilting ruler or template, with the silicone grip surface facing the fabric.
Which size should I use?
Use large hearts where the ruler has broader open areas. Use small hearts on compact templates or between closely spaced markings.
Will they hide ruler markings?
The hearts are clear, but any added layer can affect visibility slightly. Plan the positions so critical numbers, lines and registration points remain unobstructed.
Can I use them on any ruler?
They are intended for quilting rulers and templates. Check the tool maker's care guidance, especially for rulers with an existing non-slip coating, printing or a textured underside.
Can they be applied directly to fabric?
The package mentions rulers, templates and fabric. Because the hearts are adhesive and fabrics vary, test direct-fabric use on a scrap first and avoid delicate or irreplaceable material.
Are they removable or repositionable?
They are self-adhesive grips. Removal and repositioning performance can vary with the surface, age and contamination, so plan the position before pressing firmly.
Will the ruler still move?
The hearts improve traction but cannot guarantee that a ruler will never shift. Continue using steady downward pressure and safe rotary-cutting technique.
Why does my ruler rock after application?
The grips may be unevenly distributed or concentrated in one area. Recheck the layout and place matching sizes at balanced contact points.
When should I replace a heart?
Replace it when the edge lifts, the silicone is torn or dirty, the adhesive no longer holds or the traction has noticeably reduced.
How do I remove adhesive residue?
Use only a method approved by the ruler manufacturer. Avoid acetone and harsh solvents that may damage, cloud or crack acrylic.
Add grip where your ruler needs it most
Choose large or small clear silicone hearts, position them evenly beneath the tool and enjoy more controlled trimming, strip cutting and template work.
Review the Five Steps