Brother PR Embroidery Needles XC6469001 – 6 Pack

$16.90

Brother · PR embroidery needles

The specified embroidery needle matters on a PR machine

Keep a fresh needle ready for your next embroidery run. This Brother XC6469001 pack contains six size 75/11 needles for compatible PR embroidery machines. The packet is marked HAx130EBBR / 130/705 H-E; match that specification and the part number to your machine manual before fitting a replacement.

A single-size replacement pack for supported PR embroidery machines, rather than an assortment for general household sewing.

Needle pack for Brother PR embroidery machines
Six-needle pack marked HAx130EBBR / 130/705 H-E, size 11.
6 needlesSingle-size pack
75/11Embroidery size
PR seriesModel check required

Choose it for your project

Routine embroidery

Use for projects where your PR manual specifies this needle, pairing it with suitable embroidery thread and stabiliser.

Fresh-start replacements

Replace a damaged or worn needle before restarting a design. Check the hoop, threading and fabric support as well.

Keeping spares organised

Store unused needles in their labelled case so their system and size remain easy to identify at the machine.

Product details

Supplied One pack of six needles, all size 75/11.
Part number XC6469001
Needle size 75/11
Packet marking HAx130EBBR / 130/705 H-E
Machine fit Compatible Brother PR models; check the manual

Before you start

  1. Stop the machine and follow its safe needle-changing procedure before loosening the clamp.
  2. Fit the needle in the orientation and to the depth specified by your PR manual.
  3. Rethread as instructed, then test on the same fabric and stabiliser combination before stitching the finished item.

Not a blanket fit for every Brother machine. An incorrect or bent needle can interfere with stitching and the automatic needle threader.

Good to know

Are these assorted sizes?

No. All six needles are size 75/11.

Can I use an ordinary sewing needle instead?

Only use a replacement system your machine manual permits; needle size alone does not establish compatibility.