Consistent boiler steam
The 1700W boiler delivers adjustable steam through the EOS iron for opening seams, shaping garments and finishing completed work.
Current replacement model: Battistella Vulcano supersedes the former Eurovapor Maxi on this listing.
Heated vacuum table + 5L boiler + EOS ironOne complete station for steam, pressing and a crisper finish.
The Battistella Vulcano brings the heated worktop, vacuum table, stainless boiler and weighted EOS iron together in one fixed pressing station. Steam opens and shapes the fibres; vacuum holds the garment and draws moisture away; the warm worktop helps the result dry and set.
- 5L stainless boiler vessel with 3.8L useful capacity supports approximately four hours of ironing, depending on steam use.
- 2.8-bar adjustable steam delivery powers the supplied weighted EOS iron.
- 600W heated 106 × 40cm worktop creates a purposeful garment-pressing surface.
- 73W foot-controlled vacuum holds fabric and draws excess steam through the table.
- Fixed all-in-one design keeps the boiler, iron, vacuum and garment support organised in one station.
Replaces Eurovapor Maxi
3.8Luseful boiler capacity
≈ 4 hoursdepending on steam use
2.8 barworking steam pressure
73Wfoot-controlled vacuum
Steam shapes. Vacuum steadies. Heat helps set.
Fabric-holding vacuum
Foot-controlled extraction draws the garment towards the table and pulls away excess steam and humidity as you press.
Warm pressing surface
The 600W heated worktop helps reduce lingering dampness so pressed areas can dry and retain a cleaner finish.
An integrated pressing station
Everything works from one permanent setup
Instead of combining a separate board, loose boiler and iron, Vulcano organises the key pressing functions into a fixed 39kg station. The full unit measures approximately 140 × 41 × 98cm, with a garment support shelf below and iron rest beside the worktop.
For garment makers who want pressing ready when they are
Dressmaking
Open seams, set hems and shape constructed sections throughout the sewing process.
Alterations
Move from repair work to professional-looking final presentation at one station.
Sample rooms
Support repeat construction pressing across prototypes and small production runs.
Garment finishing
Use vacuum after steam to help pieces leave the table flatter, drier and ready sooner.
Fill, heat, steam, vacuum and set
Fill when cold
With the station unplugged, cold and at 0 bar, fill the boiler with distilled water without exceeding its useful capacity.
Switch on
Activate the worktop and boiler, then switch on the EOS iron as the system warms.
Prime steam
Once pressure is ready, point the iron safely away and release several short steam bursts.
Press + extract
Steam through the iron while using the foot pedal to draw moisture through the garment and table.
Dry + set
Keep vacuum running briefly after steam so the fabric dries and the pressed shape settles.
5L vessel, 3.8L useful working capacity
| Published figure | What it describes | What customers should know |
|---|---|---|
| 5 litres | The physical stainless boiler vessel size. | This is not the recommended fill amount. |
| 3.8 litres | The useful working water capacity inside the boiler. | Leave the required steam space and avoid overfilling. |
| Approximately 4 hours | The manufacturer's published ironing autonomy. | Actual time varies with how frequently and heavily steam is used. |
| 2.8 bar | The working steam pressure supplied to the EOS iron. | Steam output can be adjusted for the pressing task. |
A complete all-in-one pressing station
Stainless boiler
5L vessel with 3.8L useful capacity and a dedicated drain.
Weighted EOS iron
800W steam iron with cork handle and steam control.
Heated worktop
106 × 40cm shaped main board with 600W heating.
Vacuum extraction
73W vacuum motor activated from the supplied foot pedal.
Cable support + iron rest
Keeps the hot iron and its supply line organised while working.
Garment support shelf
Provides space beneath the worktop for garments and linen.
Optional accessory shown: Battistella's technical sheet classifies the heated vacuum sleeve arm pictured on the station as an accessory available separately; it is not included unless your order specifically states otherwise.
Use distilled water and flush the boiler weekly
Protect the boiler and steam path
Distilled water helps minimise residue from minerals and treatment chemicals found in tap water.
- Use distilled water when filling the cold boiler.
- Never add fragrance, starch, special ironing water or chemical treatments.
- Drain and flush the boiler once a week.
- Drain only when the station is cold, unplugged and the pressure gauge reads 0 bar.
- Wait at least one hour after switching off before draining.
Safe everyday operation
Vulcano is rated at 230V / 50Hz with 3173W total published power. Connect it to a suitable, correctly earthed supply.
- Avoid multi-boxes and unsuitable extension leads.
- Never open the boiler cap while the system is hot or pressurised.
- Never move the station while it is operating, hot or pressurised.
- Keep the Prontotop cover clean and correctly fitted.
- Always return the hot iron to its heat-resistant rest.
The quick reference
| Brand / model | Battistella Vulcano |
|---|---|
| Replaces | Battistella Eurovapor Maxi on this product listing |
| Product type | Fixed heated vacuum ironing table with integrated manual-fill boiler and EOS iron |
| Standard worktop size | 106 × 40cm |
| Overall dimensions | Approximately 140 × 41 × 98cm high |
| Weight | 39kg |
| Boiler vessel size | 5 litres |
| Useful boiler capacity | 3.8 litres |
| Published ironing time | Approximately 4 hours, depending on steam use |
| Steam working pressure | 2.8 bar |
| Boiler power | 1700W |
| Iron | EOS steam iron, 800W |
| Worktop heating power | 600W |
| Vacuum motor power | 73W |
| Total published power | 3173W |
| Power supply | 230V / 50Hz |
| Vacuum control | Foot pedal |
| Blowing function | No |
| Sleeve arm | Optional accessory; not included unless separately specified |
| Recommended water | Distilled water |
Finish the Vulcano setup
EOS Teflon shoe
A compatible anti-shine shoe for delicate, dark or shine-prone fabrics. Confirm that the supplied iron is marked EOS.
View EOS Teflon Shoe →Heated vacuum sleeve arm
Add a narrow pressing surface for sleeves, cuffs, trouser legs and other tubular garment sections.
Ask About the Vulcano Sleeve Arm →Battistella Vulcano FAQs
Is this still the Eurovapor Maxi?
No. Battistella Vulcano is the current replacement supplied through this former Eurovapor Maxi listing. The product title, description and specifications should all be updated to Vulcano.
Does Vulcano include the boiler and iron?
Yes. It is supplied with the integrated stainless boiler and an 800W EOS steam iron, along with the heated vacuum table.
Is the boiler capacity 5L or 3.8L?
Both figures describe different things. The boiler vessel is 5L, while the useful working water capacity is 3.8L so the boiler retains the steam space it needs.
How long does one fill last?
Battistella publishes approximately four hours of ironing autonomy. Actual time depends on how frequently and heavily steam is used.
What does the vacuum table do?
Vacuum holds the garment towards the worktop and draws away excess steam and humidity, helping the fabric remain steady and the pressed area dry more quickly.
Is the sleeve arm included?
No, unless your order specifically states otherwise. Battistella classifies the heated vacuum sleeve arm shown in the product image as an optional accessory.
Does Vulcano have a blowing function?
No. This standard configuration provides heated worktop and vacuum extraction. Blowing is a separate Vulcano version.
What water should I use?
Use distilled water to minimise minerals and treatment chemicals entering the boiler. Never add fragrance, starch, ironing additives or other treatments.
How often should the boiler be drained?
Drain and flush it once a week. The system must be cold and unplugged, the pressure gauge must read 0 bar, and at least one hour should have passed since switch-off.
Can I refill the boiler while it is hot?
No. This is a manual-fill boiler. Switch off and unplug the station, allow it to cool fully and confirm the pressure gauge reads 0 bar before opening the boiler cap.
Steam supply. Heated worktop. Vacuum finishing.
Turn pressing into one smooth, complete process.
Shape with steam, hold fabric securely and clear moisture at the same dedicated station.