Direct-drive speed control
An integrated servo motor and easy-to-reach front controls let you adjust sewing speed without a constantly running clutch motor.
ZOJE B9500-13H · Four-thread industrial overlocker
Clean seams.
A neatly finished edge.
Join and finish suitable garment seams in one pass with the ZOJE B9500-13H direct-drive four-thread industrial overlocker. The 13H is the heavier-material version in the B9500 range, combining two-needle overlocking with adjustable feed and straightforward speed control. Supplied built up with a sewing table and stand for your workroom.
2 needles · 4 threadsDirect-drive motorComplete set included
Control that makes everyday sewing easier.
Adjust the machine to the fabric and choose a pace that suits your work, from individual alterations to repeated garment seams.
Needles up or down
Select where the needles stop at the end of a sewing run, giving you a consistent position when pausing or moving to the next piece.
Adjustable differential feed
Fine-tune fabric feeding to help manage stretching, gathering or puckering and produce a cleaner edge finish.
Four-thread seam construction
Two needles work with the loopers to create a joining overlock seam while enclosing the raw edge, reducing separate handling between operations.
Your complete workroom setup
Machine, table and stand included.
The B9500-13H comes built up with a 1.2 × 0.55m table and stand. Limited height adjustment and wheels make it easier to position in your sewing space.
Table and stand colours may vary. For delivery outside Auckland, contact us to arrange freight.
Included with your machine
- ZOJE B9500-13H with direct-drive motor
- Sewing table and stand on wheels
- Thread stand
- Oil and tweezers
- Screwdriver and needles
Specifications at a glance
- Model
- ZOJE B9500-13H
- Stitch configuration
- 2 needles / 4 threads
- Subclass application
- Heavier-material four-thread overlocking
- Sewing speed
- Up to 6,000 stitches per minute
- Stitch length
- 0.5–3.8mm
- Presser-foot lift
- 5.5mm
- Needle gauge
- 2mm
- Seam width
- 2 + 4mm configuration
- Differential-feed ratio
- 0.7–2.0
- Needle system
- B27 / DC×27
Match needles, thread, stitch settings and speed to your material. Presser-foot lift is a clearance measurement, not a guaranteed sewing thickness.
Choose the right seam for your fabric.
The 13H is worth considering when your garment work calls for the heavier-material B9500 configuration. Ask us about your fabric and seam thickness before choosing. A four-thread overlock is different from a five-thread safety stitch, and this machine does not replace a coverstitch machine for parallel-stitched stretch hems.
Help with setup, threading and ongoing care.
Direct Sewing has sold, serviced and repaired sewing machines for over 30 years. We can help you choose suitable needles and thread, discuss fabric suitability and arrange freight. A one-year return-to-base warranty is included.
B9500 operation manual and parts book · B9500 threading guide