Cleaner rotary cuts
Help the ruler resist sideways movement while cutting strips, squares, blocks and patchwork shapes.
A small upgrade for steadier, more confident cutting
Help quilting rulers stay where you carefully placed them
The Gypsy Quilter No-Slip Grip Dots add clear, low-profile traction to the underside of acrylic rulers and templates. Place the large rings or smaller centre dots where they suit the tool, press them securely and reduce the frustrating sideways shift that can spoil an accurate cut.
- 24 large clear grip rings provide broad contact points on rulers and templates.
- 24 small clear centre grips fit compact templates and spaces between markings.
- Adhesive application keeps each grip attached to the underside of the tool.
- Transparent material helps preserve visibility through clear acrylic rulers.
24 Large + 24 Small
24 LargeClear adhesive rings
24 SmallUsable centre grips
48 PiecesTotal usable grips
TGQ022Manufacturer code
Why does the package front say 24 Grip Dots? The sheet has 24 ring-and-centre sets. The Gypsy Quilter's detailed specification counts the 24 large outer rings and 24 small centre dots separately, giving 48 usable grip pieces.
Reduce movement without covering the whole ruler
Acrylic rulers can slide when pressure changes during rotary cutting, block trimming or template work. Strategically placed grip dots create extra contact with the fabric while leaving most of the ruler surface clear and easy to read.
Steadier templates
Add traction to specialty acrylic templates that can be awkward to hold because of their smaller or unusual shape.
Clearer positioning
The transparent grips are less visually intrusive than opaque pads when applied away from essential measurement lines.
Use the outer rings and their centres separately
For broader contact areas
Use the larger clear rings on standard quilting rulers, long cutting guides and templates with enough open space beneath them.
For compact or busy areas
The small dots cut from the centre of each ring can fit smaller templates or spaces where a large ring may cover too much detail.
Keep the tool level: distribute grips evenly and use matching sizes where possible. Too many grips in one area, or mixing heights unevenly, can make a ruler rock instead of resting flat.
See the sheet, the two sizes and a grip being applied
A careful five-step setup
Clean, plan, peel, press and test
Start with only the number of grips needed to steady the tool. Good placement should add traction while keeping the ruler level and its most important measurement lines easy to see.
Clean the underside
Follow the ruler maker's care advice. Remove lint and oil, then let the acrylic surface dry completely.
Plan the positions
Choose clear areas near corners, ends or pressure points without covering key lines, numbers or holes.
Select the size
Use large rings where space allows and small centre dots on compact templates or busier ruler sections.
Peel and press firmly
Lift the chosen grip from its backing, place the adhesive side on the ruler underside and press it flat.
Test before cutting
Set the ruler on scrap fabric, confirm it rests level and check all grips contact the surface evenly.
Match the layout to the ruler or template
Long rulers
- Begin near the ends and corners
- Add evenly spaced grips along the length
- Check the middle does not lift or flex
- Keep cutting-edge markings visible
Square rulers
- Place grips in balanced positions
- Support all four corners where possible
- Avoid centre placement that encourages rocking
- Test at different ruler orientations
Small templates
- Use the small centre dots first
- Keep registration holes clear
- Avoid covering narrow seam guides
- Use only enough grips for stable contact
Rotary-cutting safety: added grip does not make a ruler immovable. Keep fingers safely behind the ruler edge, apply firm downward pressure without twisting, cut away from your body and stop if the ruler shifts.
Official TGQ022 demonstration
See the clear grip dots applied to a quilting ruler
The manufacturer video shows how these small adhesive grips create extra traction without covering the entire underside of the tool.
The Gypsy Quilter No-Slip Grip Dots specifications
| Brand | The Gypsy Quilter |
|---|---|
| Product | No-Slip Grip Dots |
| Manufacturer code | TGQ022 |
| Barcode / UPC | 743285010646 |
| Large grips | 24 clear adhesive rings |
| Small grips | 24 clear adhesive centre dots |
| Total usable pieces | 48 |
| Colour | Clear |
| Material | Plastic |
| Product style | Adhesive grip rings and dots |
| Primary use | Adding traction beneath compatible quilting rulers, templates and cutting guides |
| Exact dimensions | Not stated by the manufacturer |
| Included | One sheet containing 24 large grips and 24 small grips |
Replace dots that become dirty, damaged or loose
Keep the contact face clean
Brush away lint gently so the grip surface can continue making even contact with fabric.
Inspect before cutting
Replace any grip that curls, lifts, tears or lets the ruler rock. Never cut with a visibly unstable setup.
Protect acrylic rulers
When removing old adhesive, follow the ruler manufacturer's cleaning directions and avoid solvents that may craze or cloud acrylic.
No-Slip Grip Dots FAQs
How many grips are included?
The manufacturer specifies 24 large rings and 24 small centre dots, giving 48 usable grip pieces.
Why does the package say 24 Grip Dots?
The sheet is arranged as 24 ring-and-centre sets. The outer ring and its small centre can each be used as a separate grip.
Where do I attach them?
Apply them to clean, dry areas on the underside of a compatible acrylic ruler or template, with the grip surface facing the fabric.
Which size should I use?
Use large rings where the ruler has broader open areas. Use the small centres on compact templates or between closely spaced markings.
Will they hide ruler markings?
The grips are clear, but every added layer can affect visibility slightly. Plan the positions so critical numbers, lines and registration points remain unobstructed.
Can I use them on any ruler?
They are intended for quilting rulers and templates. Check the tool maker's care guidance, especially for rulers with an existing non-slip coating, printing or a textured underside.
Can I put the dots directly on fabric?
The package refers to use with rulers, templates and fabric, but direct adhesive contact may affect some fibres or finishes. Test any direct-fabric application on a scrap first.
Are they removable or repositionable?
They are adhesive grips. Removal and repositioning performance can vary with the tool surface, age and contamination, so plan the position before pressing firmly.
Will the ruler still move?
The dots improve traction but cannot guarantee that a ruler will never shift. Continue using steady downward pressure and safe rotary-cutting technique.
Why does my ruler rock after application?
The grips may be unevenly distributed or mixed in a way that creates different contact heights. Recheck the layout and use matching sizes in balanced positions.
When should I replace a grip?
Replace it when the edge lifts, the material is torn or dirty, the adhesive no longer holds or the traction has noticeably reduced.
How do I remove adhesive residue?
Use only a method approved by the ruler manufacturer. Avoid acetone and harsh solvents that may damage, cloud or crack acrylic.
Give slippery rulers a steadier connection to the cutting surface
Choose large rings or small centre dots, place them evenly beneath the tool and enjoy more controlled trimming, strip cutting and template work.
Review the Five Steps