Support one layer at a time
Slide tubular sections over the arm so sleeve and leg seams can be pressed without marking the fabric layer underneath.
Battistella Nettuno P | Industrial table + heated vacuum sleeve arm
From broad panels to narrow sleeves—without compromising the finish.
Nettuno P combines Battistella’s fixed industrial heated vacuum table with an included heated vacuum sleeve arm. Use the 120 × 40cm main surface for garment panels and yardage, then move cuffs, sleeves and tubular sections onto a properly supported narrow worktop.
- Included 150W heated vacuum sleeve arm gives narrow garment sections their own working surface.
- 0.5HP industrial vacuum motor holds fabric and draws away excess steam and moisture.
- 800W heated main worktop supports consistent production pressing.
- Fixed 60kg base-table construction creates a stable permanent finishing station.
- Foot-pedal vacuum control keeps both hands free to guide the garment and iron.
Heated vacuum arm included
150Wheated sleeve arm
120 × 40cmheated main worktop
0.5HPvacuum motor
800Wmain-board heating
A second working surface designed for the details
Heat the narrow surface
The arm has its own 150W heating, giving cuffs and sleeves a purposeful pressing surface rather than a cold accessory board.
Bring vacuum to the detail
Extraction helps keep smaller pieces positioned and draws steam and humidity away while the detail is being shaped.
Two surfaces, one productive station
Industrial heat and extraction wherever the garment takes you
The main worktop provides 800W of heat, while the sleeve arm adds 150W of dedicated heating for smaller sections. The 0.5HP vacuum motor—approximately 370W—supports controlled extraction, helping each pressed area leave the station flatter and drier.
Better support for garment sections a main board cannot reach
Sleeves
Press long seams and shaped sleeve sections with one fabric layer supported.
Cuffs
Work around compact openings and structured cuff details with more control.
Trouser legs
Slide narrow leg sections over the arm for seams, creases and finishing.
Small garments
Support children's garments and compact tubular pieces without forcing them across the main board.
Choose the surface, apply steam, extract and set
Warm
Switch on the Nettuno and set the main worktop heat using the front adjustment control.
Choose
Use the main board for broad areas or slide sleeves and tubular sections over the heated arm.
Steam + vacuum
Press with your separate iron while engaging the foot pedal to draw moisture through the surface.
Dry + set
Continue vacuum for a few extra seconds after steam so the pressed area dries and retains its shape.
The sleeve-arm Nettuno—with the package made clear
Included with Nettuno P
- Fixed industrial Nettuno ironing table
- 120 × 40cm shaped heated main worktop
- 800W main-worktop heating
- Heated vacuum sleeve arm with 150W heating
- 0.5HP vacuum motor
- Foot pedal for on-demand extraction
- Front main-worktop heat adjustment and indicator
- Fitted Prontotop main-worktop cover
- Front linen / garment support shelf
Not included with this model
- Steam generator or iron
- Blowing or air-cushion function
Do not need the sleeve arm? The standard Nettuno provides the same fixed heated vacuum main table without the arm package.
Nettuno P, standard Nettuno or Eolo Maxi Plus?
Nettuno P
Fixed industrial heated vacuum table supplied with a 150W heated vacuum sleeve arm.
Review Nettuno P SpecsNettuno Standard
The same fixed 0.5HP vacuum table for customers who only require the full-size main worktop.
View Standard NettunoEolo Maxi Plus
A lighter foldable heated vacuum board with sleeve arm when permanent floor space is limited.
View Eolo Maxi PlusThe quick reference
| Brand / configuration | Battistella Nettuno P |
|---|---|
| Product type | Fixed industrial heated vacuum ironing table with heated vacuum sleeve arm |
| Functions | Heated main worktop, heated sleeve arm and foot-controlled vacuum |
| Main worktop size | 120 × 40cm |
| Overall base-table dimensions | Approximately 140 × 44 × 93cm high |
| Main worktop height | 92cm |
| Main-worktop heating power | 800W |
| Sleeve-arm heating power | 150W |
| Vacuum motor power | 0.5HP (approximately 370W) |
| Standard power supply | 230V / 50Hz |
| Current published base-table weight | 60kg; installed and shipping weight may increase with the included arm |
| Vacuum control | Foot pedal |
| Main worktop heat control | Front adjustment knob with heating indicator |
| Steam generator / iron | Not included |
| Sleeve arm | Included; heated and vacuum assisted |
| Blowing function | No |
Battistella Nettuno P FAQs
What does the Nettuno P add?
It adds the heated vacuum sleeve arm to the standard Nettuno industrial table. The arm gives narrow and tubular garment sections a dedicated supported surface.
Is the sleeve arm heated?
Yes. Battistella specifies 150W of sleeve-arm heating, so it is more than a passive narrow board.
Does the sleeve arm use vacuum?
Yes. Vacuum extraction helps hold smaller sections in place and remove humidity as they are pressed.
Does the package include a boiler or iron?
No. Nettuno P supplies the heated vacuum table and sleeve arm. Use them with a suitable separate iron or steam generator.
How is the vacuum controlled?
Use the foot pedal when extraction is required, leaving both hands available for the garment and iron.
Does Nettuno P have a blowing function?
No. This configuration provides heating and vacuum extraction. Blowing is a separate Nettuno model.
Why continue vacuum after steaming?
A few extra seconds of extraction helps remove remaining humidity so the fabric can dry and the pressed shape can set.
Is Nettuno P foldable?
No. It is a fixed industrial station. Plan approximately 140 × 44cm for the base table plus comfortable working clearance around the fitted sleeve arm.
Why is the weight shown as 60kg?
That is Battistella's current published weight for the Nettuno base table. The fitted sleeve arm and packaging can increase the complete installed or shipping weight.
Full-size heat. Sleeve-arm control. Industrial vacuum.
Give every section of the garment proper support.
Move from broad panels to cuffs and sleeves with two purpose-built pressing surfaces in one permanent finishing station.