Cover a wider work area
Bring the shade towards the needle, ruler, document or repair without shifting the clamp.
Superlux LSB-WH | Large Equipoise task lamp
Reach across the work. Aim the light. Leave it exactly where you put it.
This classic long-reach architect lamp gives sewing rooms, studios and workbenches dependable positionable light without taking over the table. Clamp it to a horizontal surface, shape the balanced arms over the task and choose an E27 LED bulb that delivers the colour and brightness you prefer.
- 1,065mm reach carries light across wide tables, machines, cutting mats and plans.
- Equipoise articulated arms are engineered to move smoothly and hold the selected position.
- Included G-clamp fits horizontal surfaces up to 48mm thick.
- Replaceable E27 LED bulb format lets you choose the light rather than accept one fixed LED system.
- Switch on the lamp head keeps on/off control close to the illuminated area.
1,065mm articulated reach
1,065mmmaximum published reach
48mmmaximum clamp opening
E27 LEDreplaceable bulb format
19W maxLED bulb only
Long reach where compact task lamps run out of arm
The LSB-WH is made for work areas where the light needs to travel. Its large articulated frame can reach across a sewing machine, drawing board or cutting area, then fold back when the centre of the table needs to stay clear.
Direct the shade
Angle the head at the working surface and keep the brightest part of the bulb out of your normal eyeline.
Stay where positioned
The Equipoise mechanism is designed for easy movement followed by reliable, hands-free placement.
1,065mm of useful articulated reach
Precision positioningMultiple joints change reach, height and direction around the task. Table space preservedThe supplied clamp uses the edge instead of occupying the main work surface. Head-mounted switchTurn the lamp on or off where your hand naturally reaches the shade. Classic white finishA clean workshop look that suits studios, sewing rooms and offices.
Bring light in from the side, above or across the table
The familiar spring-balanced architecture is popular for a reason: it lets one fixed clamp serve multiple areas of the workstation. Move the shade closer for concentrated detail, lift it for broader coverage or fold the lamp away between sessions.
Maximum published reach1,065mm
Nearly 1.1 metres of articulated reach lets one edge-mounted lamp serve a much larger working area.
Reaches across wide desks and cutting tablesAdjusts for close detail or broader coverageHolds the selected position while you work
Official movement diagram + technical sheet
See how the arm moves before choosing your mounting position
The official Superlux diagram shows the substantial adjustment available above and around a horizontal work surface. Use it to plan where the clamp will sit and which parts of the table the shade needs to reach.
The one-page LSB-WH technical brochure confirms the 1,065mm reach, 48mm clamp capacity, 1.8m cord, E27 LED fitting and 19W maximum rating.
Open Technical Brochure (PDF)PDF opens in a new browser tab.Choose the E27 LED light that suits your work
The lamp is supplied without a bulb, giving you control over brightness and colour appearance. Fit one compatible E27 screw-in LED bulb rated at no more than 19W, and replace it later without replacing the whole lamp.
Warmer or cooler white
Select a warmer bulb for a softer room feel or a neutral/cooler option for crisp sewing, drawing and inspection.
Match the work area
Pick a lumen rating that suits your working distance, surrounding light and the amount of area you want to illuminate.
Keep the lamp in service
The standard E27 holder avoids locking the entire fixture to a non-replaceable integrated light source.
Bulb requirement: one E27 LED bulb, maximum 19W. Bulb is not included. Check the bulb's physical size is suitable for the shade before use.
Attach the lamp without sacrificing valuable desk area
Ready for a suitable horizontal edge
The supplied clamp fits a horizontal surface up to 48mm thick. It is ideal when you want the lamp secure at the back or side of a solid desk, bench or sewing table.
Prefer a freestanding desk setup?
The compatible Superlux LSM-7-WH heavy table base is available separately from Direct Sewing, letting you reposition the lamp without clamping it to the furniture.
Useful wherever light must reach and stay put
Sewing + overlocking
Bring light across the machine bed, needle, presser foot and seam allowance.
Cutting + pattern work
Lift the shade over rulers, markings, notches and larger cutting areas.
Drawing + drafting
Direct light along plans, sketches, measurements and technical detail.
Models + repairs
Aim concentrated light at assembly, electronics and fine bench work.
Office + study
Use the articulated reach across paperwork, reading and computer-adjacent tasks.
Build a better-lit workstation in five steps
Check the edge
Choose a firm horizontal surface no more than 48mm thick.
Secure the clamp
Tighten it firmly by hand without crushing or marking delicate furniture.
Fit the lamp
Seat the lamp correctly in the clamp and keep the cord clear of moving joints.
Add your bulb
Fit one suitable E27 LED bulb rated at 19W or less while power is disconnected.
Aim + switch
Position the articulated arms and use the convenient switch on the shade.
What the key specifications mean
| Specification | Published value | Why it matters |
|---|---|---|
| Maximum reach | 1,065mm | Lets the shade travel across substantial desks, machines and work surfaces. |
| Mount supplied | G-clamp for horizontal surfaces | Preserves table space and gives the articulated arm a secure starting point. |
| Maximum clamping width | 48mm | Confirms the thickest suitable horizontal work-surface edge. |
| Lamp holder | E27 screw fitting | Accepts a widely available replaceable LED bulb in the required size and rating. |
| Maximum wattage | 19W LED only | Defines the electrical limit for the customer-selected bulb. |
| Cord length | 1.8m | Helps plan the clamp position in relation to a nearby power outlet. |
| Electrical class | 220-240V; double insulated | Designed for normal NZ mains supply without an earth connection. |
The quick reference
| Brand / model | Superlux LSB-WH |
|---|---|
| Official product name | Large Equipoise Task Lamp |
| Common description | Long-reach architect / anglepoise-style task lamp |
| Finish | White |
| Maximum reach | 1,065mm |
| Supplied mounting | G-clamp for horizontal surfaces |
| Maximum clamping width | 48mm |
| Lamp holder | E27 screw fitting |
| Light source | One replaceable LED bulb; not included |
| Maximum wattage | 19W LED only |
| Switch | Integrated into lamp head / shade |
| Power supply | 220-240V mains |
| Electrical construction | Double insulated |
| Cord | 1.8m cord and plug |
| Use | Indoor task lighting |
| Optional mounting system | Compatible with selected Superlux Equipoise bases and brackets, sold separately |
A complete frame and clamp—ready for your chosen bulb
White long-reach Equipoise frame with adjustable shade and integrated switch.
For a suitable horizontal work surface up to 48mm thick.
Ready for a nearby standard NZ mains outlet.
Choose a compatible bulb up to 19W; the bulb is not supplied.
White LSB, black LSB or medium LSA?
LSB-WH Large Equipoise – White
Choose this model for the full 1,065mm reach, white finish, included clamp and freedom to select an E27 LED bulb.
Review This Lamp's Specs →LSB-BL Large Equipoise – Black
The same long-reach clamp-lamp concept in black for darker workstations, studios and industrial-style spaces.
View the Black LSB →LSA-WH Medium Equipoise + Base
Choose the medium-reach white model when a freestanding heavy table base suits the workstation better than maximum reach.
View the Medium LSA →Superlux LSB-WH FAQs
Is a bulb included?
No. The lamp is supplied without a bulb so you can choose a compatible E27 LED bulb with the colour and brightness you prefer.
Which bulb does the LSB-WH require?
Use one E27 screw-in LED bulb rated at no more than 19W. Check that the bulb's physical size suits the shade.
Can I use an incandescent or halogen bulb?
No. The current manufacturer specification states LED bulbs only, with a maximum rating of 19W.
How far does the lamp reach?
The published reach is 1,065mm, making this the large Superlux Equipoise format for substantial desks and work areas.
How thick can the table be?
The included G-clamp fits horizontal surfaces up to 48mm thick.
Is a heavy desk base included?
No. This version includes the G-clamp. The compatible Superlux LSM-7-WH heavy table base is available separately if you prefer a freestanding setup.
Can the light be dimmed?
The LSB-WH has an on/off switch in the lamp head and no built-in dimmer is specified. Choose the bulb output carefully for the intended working distance.
Can I choose warm or cool light?
Yes—through your bulb choice. Select a compatible E27 LED in the colour temperature you prefer; the lamp itself does not lock you into one fixed colour.
Where is the switch?
The on/off switch is incorporated into the lamp head, keeping control close to the working area.
Is it suitable for sewing and cutting tables?
Yes. Its long articulated reach and edge-mounted clamp are especially useful where light needs to travel across a machine, cutting mat or pattern area while keeping the central surface clear.
Long reach. Precise placement. Your choice of light.
Give the whole workstation a lamp that moves with the task.
Secure the clamp, fit your preferred E27 LED and position the shade wherever clear work demands it.