Precise to the points
Madeira specifies the highest-precision cut through to the blade tips for neat needlework finishing.
Madeira 9479 · Stork embroidery scissors
Decorative stork styling with precise straight cutting points
Madeira 9479 Stork Embroidery Scissors combine an ornamental stork-shaped handle with straight fine blades and a 24-carat gold-plated surface. The compact approximately 9 cm format is easy to manage for careful thread, yarn and floss trimming across many needlework styles.
- Distinctive stork design with a compact, comfortable hand-held format.
- Straight fine points designed for precise cutting through to the blade tips.
- Approximately 9 cm overall with a 24-carat gold-plated finish.
Stork
ornamental handle design
Approx. 9 cm
compact overall length
24 Carat
gold-plated surface
9479
Madeira article number
Madeira’s catalogue lists article 9479 at approximately 9 cm / 3.5 inches. It has a straight-point stork design, not the raised double-curved profile used by article 9478.
More than a decorative sewing-room classic
The stork silhouette gives these scissors their recognisable appearance, but Madeira builds the practical specification around clean thread cutting and accuracy at the points. The small size is suited to controlled finishing rather than long cuts through fabric.
Easy to manage
The compact form is comfortable to hold and simple to position for short, controlled cuts.
24-carat gold plating
The gold-plated surface gives the familiar stork design its bright decorative finish.
Gold plated does not mean solid gold. The 24-carat description refers to the decorative surface finish over the scissor body.
Keep the fine points ready for short finishing cuts
Madeira describes the 9479 stork scissors as suitable for all types of needlework and for cleanly nipping thread, yarn and floss. Choose them for precision trimming rather than heavy general cutting.
Trim embroidery floss and short tails around detailed hand-stitched work.
Use the compact straight points for neat finishing across counted-thread and decorative projects.
Trim accessible jump threads after stopping the machine and removing or safely supporting the work.
Preserve the fine edge. Avoid paper, wire, pins, thick plastic and other hard materials that can nick or dull precision embroidery scissors.
Choose straight stork points or a raised double curve
| Model | Madeira 9479 | Madeira 9478 |
|---|---|---|
| Design | Ornamental stork handle with straight fine points | Raised double-curved handle and curved fine points |
| Approximate size | 9 cm / 3.5 in | 9 cm / 3.5 in |
| Best fit | General hand embroidery and needlework trimming | Reaching over hoops or into difficult machine-embroidery areas |
Make each fine-point cut deliberate
Support the work
Keep the fabric or hoop stable so it cannot move upwards towards the points.
Separate the thread
Confirm that only the intended thread, yarn or floss sits between the blades.
Keep tips visible
Watch the full cutting point and keep it clear of neighbouring stitches and fabric.
Close without twisting
Make one clean cut, then inspect the finish before trimming another thread.
Madeira Stork Embroidery Scissors 9479 at a glance
| Brand | Madeira |
|---|---|
| Product | Stork-design embroidery scissors |
| Article number | 9479 |
| Overall length | Approximately 9 cm / 3.5 in |
| Finish | 24-carat gold plated |
| Blade style | Straight fine points in an ornamental stork design |
| Cutting performance | Designed for precise cutting through to the blade tips |
| Recommended use | Thread, yarn and floss trimming across embroidery and other needlework |
| Pack contents | 1 pair of scissors |
| Barcode / GTIN | 4003760994790 |
Madeira 9479 stork scissors FAQs
How large are Madeira 9479 scissors?
Madeira’s catalogue lists them at approximately 9 cm / 3.5 inches overall.
Are the scissors made from solid gold?
No. Madeira specifies a 24-carat gold-plated model, which describes the surface finish rather than the core material.
Are the blades straight or curved?
Madeira’s catalogue identifies article 9479 as the stork design with straight points.
What can I cut with them?
Madeira recommends them for cleanly trimming thread, yarn and floss across embroidery and other needlework.
What is the difference between 9479 and 9478?
The 9479 has a decorative stork handle and straight fine points. The 9478 uses a raised double-curved profile designed for hoop and machine access.
Are they suitable for machine embroidery?
Yes, for accessible thread trimming after the machine is stopped. A double-curved model may be easier when reaching over a deep hoop.
Can they cut fabric or heavy stabiliser?
They are precision thread scissors. Use fabric shears or suitable appliqué scissors for long fabric cuts and extensive backing removal.
How should I store them?
Keep them clean and dry with the blades closed and the fine points protected from contact with heavier tools.
Keep precise stork points ready beside your needlework
Madeira 9479 combines a compact ornamental handle, straight fine cutting points and a 24-carat gold-plated finish for careful embroidery-thread trimming.