30 built-in stitches
Choose utility, stretch, appliqué and decorative stitches for garments, crafts and repairs.
Lightweight computerised sewing and quilting machine
Janome DC2030
Enjoy easy computerised sewing with a quilting-ready package included from day one. The Janome DC2030 combines 30 built-in stitches, adjustable speed, needle up/down, start/stop sewing and a built-in needle threader with a bonus extension table, 1/4-inch seam foot and even-feed foot.
30
built-in stitches
820 SPM
maximum sewing speed
158.5mm
workspace width
5kg
lightweight portability
Simple enough for beginners with room to grow
The Janome DC2030 is designed for sewists who want the control and convenience of a computerised machine without unnecessary complication.
Select a stitch using the electronic controls, set the maximum sewing speed and choose whether to operate with the foot controller or the start/stop button.
Needle up/down, automatic lock-off, easy reverse and a built-in needle threader make everyday garment construction, patchwork, repairs and creative sewing more efficient.
At approximately 5kg, the machine is easy to move to sewing classes, workshops or storage between projects.
Excellent New Zealand bonus package
Extension table and quilting feet included
The DC2030 includes the everyday feet required for general sewing plus three valuable bonus accessories packaged with the machine.
- Large extension table
- Bonus even-feed foot
- Bonus 1/4-inch seam foot
- Zigzag Foot A
- Zipper Foot E
- Satin Stitch Foot F
- Sliding Buttonhole Foot J
- Janome bobbins × 3
- Needle set
- Foot controller
- Maintenance tools
- Soft machine cover
Useful computerised functions with a strong quilting package
Built-in needle threader
Reduce the close-up work required to pass the upper thread through the needle eye.
Start and stop button
Sew without the foot controller and hold the button for slower starts or finishes.
Speed-control slider
Limit the maximum sewing speed for beginners, curves, appliqué and detailed work.
Needle up or down
Raise or lower the needle at the touch of a button for pivoting and fabric positioning.
Automatic lock-off
Secure suitable stitches neatly without repeatedly reversing over the seam.
Even-feed foot included
Feed the upper and lower fabric layers together for quilting and difficult materials.
Extension table included
Support patchwork, quilts, garments and home décor across a broader sewing surface.
30
Built-in stitches
A practical selection for everyday construction, stretch fabrics, appliqué, decorative sewing, edge finishing and repairs.
A useful everyday stitch selection
View every stitch directly on the machine
The complete stitch reference chart is printed across the front panel, making it easy to find the required pattern.
Select the stitch number using the electronic controls and confirm it on the two-digit display.
- Straight stitches
- Zigzag stitches
- Stretch seams
- Overcasting stitches
- Blind hemming
- Appliqué stitches
- Decorative patterns
- Memory buttonhole
Control speed, needle position and seam finishing
Start and stop
Sew without the foot controller when direct hand control is preferred.
Slow start and finish
Hold the start/stop button to sew slowly at the beginning or end.
Speed slider
Limit maximum sewing speed independently of pedal pressure.
Needle up/down
Move the needle between its raised and lowered positions.
Automatic lock-off
Secure compatible stitches using the dedicated locking button.
Easy reverse
Reinforce standard construction seams using the reverse control.
The DC2030 has needle up/down control, but the selected stop position is not memorised after the machine is switched off.
Quilting accessories included
Even-feed foot, 1/4-inch foot and extension table
The DC2030 arrives with accessories that are often optional purchases on other entry-level computerised machines.
The even-feed foot helps move multiple fabric layers together, while the 1/4-inch foot supports accurate patchwork seam allowances.
The large extension table provides additional support around the sewing bed for quilt blocks and larger projects.
Ideal for
- Patchwork piecing
- Quilt sandwiches
- Checks and stripes
- Layered fabrics
- Bag making
- Home décor
- Long garment pieces
- Light quilting
Bonus even-feed foot
A standard feed dog moves fabric from beneath the project. The even-feed foot adds movement from above.
Feeding the upper and lower layers together helps reduce shifting when sewing quilt sandwiches, plaids, stripes and layered projects.
Quilt sandwiches
Help keep the quilt top, batting and backing aligned.
Checks and stripes
Reduce unwanted movement between matching fabric layers.
Slippery materials
Improve control when one fabric layer moves differently from another.
Layered sewing
Support more consistent feeding through bags and home décor projects.
Bonus 1/4-inch seam foot
The included foot helps maintain the narrow seam allowance commonly used in patchwork and quilting.
Guide the fabric edge along the side of the foot to create more consistent seams across quilt blocks and small fabric pieces.
Combine the foot with needle up/down and the speed slider for additional control when pivoting or joining detailed units.
Compact body with useful workspace
158.5mm to the right of the needle
The DC2030 provides approximately 158.5mm of workspace between the needle and the machine body.
Fit the supplied extension table when extra support is needed around the sewing bed.
Remove the front accessory compartment to reveal the free arm for cuffs, sleeves, trouser hems and other tubular projects.
- 158.5mm workspace width
- Large extension table included
- Convertible free arm
- Accessory storage compartment
- Built-in folding handle
- Approximately 5kg
5kg
Lightweight machine body
Easy to take to sewing classes, quilting groups and workshops or return to storage after use.
Top-loading bobbin and built-in needle threader
The horizontal rotary-hook bobbin loads from above, allowing it to be inserted without removing a front bobbin case.
The transparent cover makes it easier to monitor the remaining thread while sewing.
The built-in needle threader helps pull the upper thread through the needle eye and reduces close-up threading work.
- Top-loading bobbin
- Full rotary hook
- Clear bobbin cover
- Built-in needle threader
- Bobbin winder
- Three bobbins included
Built-in memory buttonhole
Use the supplied sliding Buttonhole Foot J to sew buttonholes for garments, bags, cushions and craft projects.
The machine records the completed sequence and can repeat the same buttonhole size during the current sewing task.
The DC2030 uses a memory buttonhole rather than an automatic button-measuring one-step buttonhole foot.
Four-piece feed dog and rigid internal frame
Four feed-dog sections move the project beneath the presser foot while the die-cast aluminium internal frame supports stable operation.
The machine is suitable for general woven fabrics, garment-weight denim, stretch fabrics, patchwork cotton and layered home-sewing projects when the correct needle, thread, foot and settings are used.
Presser-foot pressure is fixed and cannot be manually adjusted on the DC2030.
Drop feed for darning and free-motion techniques
Lower the feed dogs when you want to move the fabric manually rather than having the machine advance it automatically.
This supports darning, free-motion practice and selected creative techniques with a compatible darning or free-motion foot.
The feed dogs can be raised again for ordinary sewing and fabric feeding.
A strong choice for beginners, classes and practical quilting
Beginner sewing
Sewing classes
Patchwork
Light quilting
Garment construction
Repairs and alterations
Stretch fabrics
Appliqué
Bag making
Home décor
Craft projects
Portable sewing
Important information before purchasing
The DC2030 is a domestic sewing and quilting machine. It is not an overlocker, embroidery machine or industrial sewing machine.
It does not have an automatic thread cutter. Thread is trimmed using the manual cutter on the faceplate or sewing scissors.
It does not provide adjustable presser-foot pressure, automatic thread tension, built-in lettering, thread sensors, USB connectivity or Wi-Fi.
The included cover is a soft dust cover rather than a rigid hard cover.
Janome DC2030 included accessories
Standard and bonus sewing feet
- Zigzag Foot A
- Zipper Foot E
- Satin Stitch Foot F
- Sliding Buttonhole Foot J
- Bonus 1/4-inch Seam Foot
- Bonus Even-Feed Foot
Bobbins, needles and threading accessories
- Janome plastic bobbins × 3
- Needle set with three size #14 needles
- Additional spool pin
- Large spool holder
- Small spool holder
Workspace, tools and protection
- Bonus large extension table
- Foot controller
- Power cable
- Screwdriver
- Lint brush
- Seam ripper
- Instruction book
- Soft machine cover
Janome DC2030 specifications
| Machine type | Computerised domestic sewing and quilting machine |
|---|---|
| Built-in stitches | 30 |
| Buttonhole | One memory buttonhole |
| Maximum sewing speed | Up to 820 stitches per minute |
| Maximum stitch length | Up to 4mm |
| Workspace | Approximately 158.5mm to the right of the needle |
| Machine display | Two-digit LED display |
| Quick-reference chart | Printed across the front of the machine |
| Thread tension | Manual adjustable tension dial |
| Presser-foot pressure | Fixed, not adjustable |
| Needle threader | Built in |
| Bobbin system | Top-loading full rotary hook |
| Bobbin winder | Yes |
| Feed system | Four-piece feed dog |
| Drop feed | Yes |
| Start and stop button | Yes |
| Speed-control slider | Yes |
| Needle up or down | Yes, without memorised setting |
| Automatic lock-off | Yes |
| Reverse button | Yes |
| Automatic thread cutter | No |
| Manual thread cutter | Yes, on the machine faceplate |
| Needle plate | Precision markings with needle-drop references |
| Lighting | White LED sewing light |
| Free arm | Yes |
| Accessory storage | Inside the removable accessory compartment |
| Carry handle | Folding handle on top of the machine |
| Internal frame | Rigid die-cast aluminium frame |
| Standard sewing feet | Four standard feet plus bonus 1/4-inch and even-feed feet |
| Extension table | Large extension table included |
| Foot controller | Included |
| Machine dimensions | Approximately 385mm wide × 282mm high × 150mm deep |
| Machine weight | Approximately 5kg |
| Machine cover | Soft dust cover included |
Popular compatible optional accessories
Quilting and free-motion accessories
- Convertible even-feed foot set
- Open-toe even-feed foot
- Closed-toe darning foot
- Open-toe darning foot
- Ditch-quilting foot
- Clear-view quilting foot and guide set
- Sliding-guide foot
- Straight-stitch foot
Garment and everyday sewing feet
- Appliqué foot
- Adjustable blind-hem foot
- Button-sewing foot
- Concealed zipper foot
- Adjustable zipper foot
- Gathering foot
- Rolled-hem foot
- Ultra Glide foot
- Roller foot
- Ruffler
Creative and decorative accessories
- Beading-foot set
- Binder foot
- Border-guide foot
- Cording foot
- Piping foot
- Ribbon and sequin foot
- Open-toe satin-stitch foot
- Tape-guide foot
Choose the model that matches how you sew
| Feature | DC2030 | DC6050 |
|---|---|---|
| Built-in stitches | 30 | 50 |
| Buttonholes | One memory buttonhole | Three one-step buttonholes |
| Automatic thread cutter | No | Yes |
| Adjustable foot pressure | No | Six levels |
| Even-feed foot | Included | Optional |
| 1/4-inch seam foot | Included | Included |
| Extension table | Included | Included |
| Machine cover | Soft cover | Hard cover |
| Machine weight | Approximately 5kg | Approximately 6.4kg |
Choose the DC2030 for an affordable, lightweight machine with an excellent included quilting package.
Choose the DC6050 when automatic thread cutting, adjustable presser-foot pressure and a larger stitch and buttonhole selection are more important.
Janome DC2030 product information
Janome New Zealand
View the current regional specifications, standard accessories and optional feet.
Janome Australia
View the matching Australian and New Zealand model information and accessory package.
Janome DC2030 FAQ
Is the Janome DC2030 suitable for beginners?
Yes. The speed slider, start/stop button, visible stitch chart and straightforward electronic controls make it approachable for beginners.
How many stitches does it have?
It includes 30 built-in utility, stretch and decorative stitches.
Does it include an extension table?
Yes. A large extension table is included as a bonus accessory in the New Zealand package.
Does it include an even-feed foot?
Yes. A bonus even-feed foot is included for quilting and difficult layered fabrics.
Does it include a 1/4-inch foot?
Yes. A bonus 1/4-inch seam foot is included for accurate patchwork piecing.
Does it have an automatic thread cutter?
No. Threads are trimmed using the manual cutter on the machine faceplate or sewing scissors.
Does it have a built-in needle threader?
Yes. The built-in mechanism helps draw the upper thread through the needle eye.
Can it sew without the foot controller?
Yes. Use the start/stop button together with the speed-control slider.
Does it have needle up and down?
Yes. The needle can be moved between the raised and lowered positions using the dedicated button.
Does it have adjustable presser-foot pressure?
No. Presser-foot pressure is fixed on the DC2030.
Can it sew buttonholes?
Yes. It includes one memory buttonhole and a sliding buttonhole foot.
Can it sew stretch fabric?
Yes. It includes stretch stitches suitable for jersey and knit garments when used with the correct needle, thread and settings.
Can it sew denim?
It can sew ordinary garment-weight denim when set up with a suitable denim needle, thread and stitch. It is not an industrial or dedicated heavy-duty machine.
Can it quilt?
Yes. The included extension table, 1/4-inch foot, even-feed foot, needle up/down function and drop feed make it particularly well equipped for patchwork and light quilting.
Does it have a hard cover?
No. A soft dust cover is included.
How heavy is the DC2030?
It weighs approximately 5kg, making it easy to take to classes or store between projects.
Is it an embroidery machine?
No. It is a computerised sewing and quilting machine and does not connect to an embroidery unit.
Buy from New Zealand Janome specialists
Expert advice, authorised warranty and in-house servicing
Direct Sewing has supplied sewing, quilting, embroidery and overlocking equipment throughout New Zealand since 2001. Our experienced team can demonstrate the Janome DC2030 and explain its stitches, speed controls, quilting feet, extension table and buttonhole function.
Every machine is backed by full authorised New Zealand Janome warranty support and our own in-house workshop, where repairs and servicing are completed by experienced sewing-machine technicians.
For beginners, class attendees and sewists wanting a lightweight computerised machine with valuable quilting accessories already included, the Janome DC2030 is an outstanding package.