Access tight spaces
The narrow applicator extends into areas that may be difficult to reach with a standard oil-bottle nozzle.
Madeira 050PEN is a refillable 7.39 ml oiling pen designed for controlled machine lubrication. Its fine needle-like applicator reaches tight spaces and helps place oil directly at the maintenance points specified by your embroidery or sewing-machine manufacturer.
This listing is for article 050PEN, the 7.39 ml model. Madeira’s current 12 ml pen is a different article, 050RL10G. Keep the model numbers separate when comparing capacity or ordering a replacement.
Large bottles can be awkward around a detailed machine mechanism. The long narrow spout of the 050PEN helps reach the specified lubrication point and deliver oil without positioning a bulky bottle over the work area.
The narrow applicator extends into areas that may be difficult to reach with a standard oil-bottle nozzle.
A fine tip makes it easier to align the oil with one manual-specified location instead of wetting surrounding surfaces.
Madeira specifies that the pen can be refilled repeatedly with suitable standard embroidery-machine oil.
The pen is intended for precise lubrication of hard-to-reach machine parts. The correct points, oil type and maintenance interval depend on the individual machine.
Reach small lubrication points identified in the manufacturer’s maintenance instructions.
Use only when the machine manual calls for user-applied oil and specifies a suitable location.
Keep a compact precision applicator ready for approved maintenance without handling a large oil bottle at the machine.
| Applicator | Delivery style | Best fit |
|---|---|---|
| Madeira 050PEN | Fine needle-like point with refillable 7.39 ml reservoir | Precise access to difficult machine parts named in the manual |
| Standard oil bottle | Larger reservoir with a conventional dropper nozzle | Accessible lubrication points and refilling a suitable precision pen |
| Specialist oil spray | Pressurised or pump delivery designed for specified mechanisms | Only applications explicitly approved for that spray and machine |
Confirm the exact oil type, lubrication point, quantity and maintenance interval for your machine.
Switch off and unplug the machine, then remove lint as directed before opening the oil pen.
Align the fine applicator with the specified point and dispense only the stated amount.
Remove any visible excess, clean the applicator exterior and replace the cap before storage.
Refill with clean standard embroidery-machine oil that meets the equipment manufacturer’s requirements.
Avoid combining unidentified oils or adding household lubricants, solvents or spray products to the reservoir.
Replace the cap after use and do not bend, enlarge or probe the applicator with pins or wire.
Keep the capped pen away from fabric, children and heat, following the storage guidance supplied with the oil.
| Brand | Madeira |
|---|---|
| Product | Refillable precision machine oil pen |
| Article number | 050PEN |
| Capacity / content | 7.39 ml, as specified in Madeira’s catalogue for article 050PEN |
| Applicator | Fine needle-like precision spout |
| Closure | Protective cap |
| Refillable | Yes, with suitable standard embroidery-machine oil |
| Recommended use | Precise lubrication of hard-to-reach machine parts where the equipment manual requires oil |
| Pack contents | 1 oil pen |
| Different current article | 050RL10G is Madeira’s current 12 ml oil pen and is not the same SKU as 050PEN |
Madeira 050PEN combines a refillable 7.39 ml reservoir, fine capped applicator and compact format for manual-approved embroidery and sewing-machine lubrication.